Bedienungsanleitung Yamaha ysp 4100 (Seite 41 von 54) (Englisch)

419747

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

41 En

PREPARATIONINTRODUCTION APPENDIXPLAYBACK FEATURES SETTINGS

■ FM tuner

■ Remote control

Digital audio signals cannot be

played back. (q DIGITAL indicator

does not light up in the front panel

display.)

The playback component is connected to this unit

with an analog connection.

Connect them with an HDMI connection or a digital

connection.

The external component is not set to output digital

audio signals.

Refer to the owner’s manual supplied with your

component and check the setting.

—

Bit streaming is disabled on the external component. Refer to the owner’s manual supplied with your

component and check the setting.

—

There is noise interference when a

subwoofer is not connected to this

unit.

The protection circuitry was in operation because a

source with strong bass elements was played back.

Turn down the volume level.

Set “BASS OUT” to “SUBWOOFER” in

“SUBWOOFER SET”.

Connect a subwoofer and adjust settings for

“SUBWOOFER SET”.

On-screen display does not

appear.

The cable is not connected to the TV or this unit

properly.

Connect the cable properly.

The HDMI control function does

not work properly.

“HDMI CONTROL” is set to “OFF” in “SET

MENU”.

Set “HDMI CONTROL” to “ON” in “SET MENU”.

The HDMI control function is disabled on your TV. Refer to the owner’s manual supplied with your TV

and check the setting.

—

The number of the connected HDMI components is

over the limit.

Disconnect some of the HDMI components.

—

The automatic lipsync is not

effective even “AUTO LIP SYNC” is

set to “ON”.

The TV does not support the automatic lipsync. Set “AUTO LIP SYNC” to “OFF” and then manually

adjust the audio output delay.

“Not Available” appears on the

front panel display after key

operation.

The key is unable to function in the current condition. —

Problem Cause Remedy

See

page

FM stereo reception is noisy. The characteristics of FM stereo broadcasts may

cause this problem when the transmitter is too far

away or the antenna input is poor.

Check the antenna connections.

Try using a high-quality directional FM antenna.

—

Use the manual tuning method.

There is distortion, and clear

reception cannot be obtained even

with a good FM antenna.

There is multi-path interference. Adjust the antenna position to eliminate multi-path

interference.

—

The desired station cannot be

tuned into with the automatic

tuning method.

The signal is too weak. Use a high-quality directional FM antenna.

—

Use the manual tuning method.

Previously preset stations can no

longer be tuned into.

This unit has been disconnected for a long period. Preset the stations again.

Problem Cause Remedy

See

page

The remote control does not work

and/or function properly.

Wrong distance or angle. The remote control functions within a maximum

range of 6 m (20 ft) and no more than 30 degrees off-

axis from the front panel.

Direct sunlight or lighting (from an inverter type of

fluorescent lamp, etc.) is striking the remote control

sensor of this unit.

Reposition this unit.

—

The batteries are weak. Replace all batteries.

Problem Cause Remedy

See

page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ysp 4100 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ysp 4100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info