Bedienungsanleitung Yamaha ysp 5100 (Seite 35 von 54) (Englisch)

419748

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

35 En

PREPARATIONINTRODUCTION APPENDIXPLAYBACK FEATURES SETTINGS

Customizing this unit

(SET MENU)

System

configurations

(ADVANCED SETUP)

Using an external

amplifier

Controlling external

components

SOUND OUT (Sound output redirection)

Use to redirect the output of audio signals. Audio output

of all the channels switches simultaneously.

Choices: SPEAKER*, PRE OUT

• Select SPEAKER to output sounds from this unit.

• Select PRE OUT to output audio signals from the PRE

OUT jacks of this unit. You also need to configure the

parameters from “BASS OUT” to “LFE Level”

described below.

• The parameters from “BASS OUT” to “LFE Level” are settings

for the PRE OUT jacks when they are selected as audio output

jacks.

BASS OUT (Bass sound output redirection)

Use to redirect the output of bass sounds. The settings

under “BASS OUT” are for the PRE OUT jacks.

Choices: SUBWOOFER, FRONT*

• Select SUBWOOFER to output bass sounds from the

subwoofer.

• Select FRONT to output bass sounds from the external

front right and left speakers.

Front SP Size (Front speaker size for PRE OUT)

Select the size of external front speakers.

Choices: Small, Large*

• Select Small if the diameter of the front speaker’s

woofer is smaller than 16 cm. Low-frequency parts of

front right and left channel signals are output from the

subwoofer.

Center SP Size (Center speaker size for PRE

OUT)

Select the size of external center speakers.

Choices: None, Small*

• Select None if no center speaker is used. Center

channel signals are mixed into the front right and left

speakers.

• Select Small if a center speaker is used. Low-frequency

parts of center channel signals are output from the

subwoofer (or mixed into the front right and left

channel signals if subwoofer is not available).

PRE OUT Volume (PRE OUT volume)

Adjust the output level of the PRE OUT jacks.

Control range: –30.0 dB to 0.0 dB

Initial setting: –18.0 dB

LFE Level (Low-frequency effect level for PRE

OUT)

Adjust the low-frequency effect output level of the PRE

OUT jacks. This setting is effective only when this unit

decodes Dolby Digital or DTS signals.

Control range: –20 dB to + 0 dB*

■ INPUT ASSIGNMENT (Input assignment)

SET MENU → INPUT MENU → INPUT

ASSIGNMENT

Use to change the key assignments of input jacks on this

unit. The parenthetic references displayed in the menu

screen indicate the initial settings.

See also: “AUDIO SELECT” (page 36)

• Press G to proceed to the next page.

AUDIO1

Select the key to which the AUDIO IN (TV) jacks are

assigned.

Choices: TV*, AUX1, AUX2, HDMI1, HDMI2, HDMI3,

HDMI4

Note

• The input already selected in “AUDIO2” is not displayed. To set

the input selected in “AUDIO2”, change “AUDIO2” parameter,

and then reconfigure.

AUDIO2

Select the key to which the AUDIO IN (AUX 1) jacks are

assigned.

Choices: AUX1*, AUX2, HDMI1, HDMI2, HDMI3,

HDMI4, TV

Note

• The input already selected in “AUDIO1” is not displayed. To set

the input selected in “AUDIO1”, change “AUDIO1” parameter,

and then reconfigure.

OPTICAL1

Select the key to which the DIGITAL IN (TV) jack is

assigned.

Choices: TV*, AUX1, AUX2, HDMI1, HDMI2, HDMI3,

HDMI4

Note

• The input already selected in “OPTICAL2” or “COAX” is not

displayed. To set the input selected in one of these parameters,

change the corresponding parameter, and then reconfigure.

OPTICAL2

Select the key to which the DIGITAL IN (AUX 1) jack is

assigned.

Choices: AUX1*, AUX2, HDMI1, HDMI2, HDMI3,

HDMI4, TV

Note

• The input already selected in “OPTICAL1” or “COAX” is not

displayed. To set the input selected in one of these parameters,

change the corresponding parameter, and then reconfigure.

COAX

Select the key to which the DIGITAL IN (AUX 2) jack is

assigned.

Choices: AUX2*, HDMI1, HDMI2, HDMI3, HDMI4, TV,

AUX1

Note

• The input already selected in “OPTICAL1” or “OPTICAL2” is

not displayed. To set the input selected in one of these

parameters, change the corresponding parameter, and then

reconfigure.

■ INPUT RENAME (Input rename)

SET MENU → INPUT MENU → INPUT RENAME

Use to change the name of the input source displayed

when the input source is selected. Select a name from

templates, or enter an original name.

Selecting a name from templates

1 Press G / to select the input source to

be renamed.

INPUT MENU

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ysp 5100 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ysp 5100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info