Bedienungsanleitung Yamaha ysp 5100 (Seite 37 von 54) (Englisch)

419748

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

37 En

PREPARATIONINTRODUCTION APPENDIXPLAYBACK FEATURES SETTINGS

Customizing this unit

(SET MENU)

System

configurations

(ADVANCED SETUP)

Using an external

amplifier

Controlling external

components

■ OSD SETUP (OSD setup)

SET MENU → DISPLAY MENU → OSD SETUP

Use to adjust the display position and select the

background color of the OSD.

OSD SHIFT (OSD shift)

Use to adjust the vertical position of the OSD. Adjust

toward the – (minus) direction to raise the position of the

OSD, and adjust toward the + (plus) direction to lower it.

Choices: –5 to +5

Initial setting: ±0

OSD BACK COLOR (OSD background color)

Use to select the background color of the OSD.

Choices: Blue*, Gray, Black, Purple, Red

■ LANGUAGE SETUP (Language setup)

SET MENU → DISPLAY MENU → LANGUAGE

SETUP

Use to select the language used in the OSD.

Choices: ENGLISH (English), DEUTSCH (German),

Français (French), ESPAÑOL (Spanish),

ITALIANO (Italian), NEDERLANDS (Dutch),

Русский (Russian)

Initial setting: ENGLISH (English)

■ UNIT SETUP (Unit setup)

SET MENU → DISPLAY MENU → UNIT SETUP

Use this to change the display unit of measurement.

Choices: METERS*, FEET

• Select METERS to enter distances in meters.

• Select FEET to enter distances in feet.

Note

• If you change this setting, the adjusted sound beam settings may

change.

This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to

adjust and customize the way this unit operates.

1 Press CPower p key to set this unit to the

standby mode.

2 While holding down INPUT on the front

panel, press CPower p key on the remote

control.

Keep holding down INPUT until “ADVANCED

SETUP” appears on the front panel display.

3 Press ISETUP.

4 Press G / to select the desired menu

and then press GENTER.

• To return to the previous screen, press IRETURN.

5 Press G / to select the desired

parameter.

6 Press CPower p key to set this unit to the

standby mode.

The new setting will be reflected when you turn on

this unit next time.

• The initial settings are marked with “*”.

TURN ON VOLUME (Volume level at power-on)

Set the initial volume level when the power of this unit is

turned on.

Control range: OFF*, 01 to 99, MAX (Maximum)

MAX VOLUME SET (Maximum volume setting)

Set the maximum volume level so that this unit will not

output sound beyond the limited volume level.

Control range: 01 to 99, MAX* (Maximum)

PANEL INP.KEY (Front panel input key)

Select whether or not to enable the INPUT key on front

panel key. To disable the operations, select “P.INPUT:

OFF”.

Choices: P.INPUT: ON*, P.INPUT: OFF

F.PANEL KEY (Front panel key)

Select whether or not to enable front panel key operations

(except ADVANCED SETUP operations). To disable the

operations, select “F.PANEL: OFF”.

Choices: F.PANEL: ON*, F.PANEL: OFF

System configurations (ADVANCED SETUP)

INPUT VOLUME INTELLIBEAM MIC

INPUT

VOL

DEMOX MODE

Example (when “DEMO MODE” is selected)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha ysp 5100 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha ysp 5100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info