Bedienungsanleitung Yeoman CL Electric Range (Seite 7 von 32) (Englisch)

813336

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

User Instructions

Normal Control Mode

2b.24 Normal Control Mode is the default setting.

Alternatively press button until the logo is shown at

the upper right corner of the screen, see Diagram 10.

2b.25 Press the ‘+’ or ‘-’ button to adjust the setting temperature

from 17 ℃ to 25℃.

2b.26 Press button to turn the heat on/off, ON or

OFF will show at the lower right corner of the screen,

see Diagram 11.

Note: It is normal for the fan heater to stop running for

periods of time. This happens if the room temperature is

higher than the temperature set on the control.

The heater indicator will be turned off after 10s if the flame

is switched ON. The heater indicator will stay ON if only the

heating function is used.

When in Normal Control Mode switching the appliance

off with the remote will stop both the light and heat

output.

Count Down Timer

This setting is only in normal heating control mode. It allows

the appliance to be returned to Standby after a set period of

time. The heater must be switched on to use this function.

2b.27 Press to cycle through the setting from Off and 0.5 hours

to 9 hours. Timer logo and remaining time will show on the

screen.

The heater of appliance can be automatically run by using

daily timer and weekly timer on the remote.

Battery

The battery power level is indicated at the top right of the

remote control screen, see Diagram 3.

Battery Full No action required

Battery Half Power Ensure new batteries are available.

Battery Empty Replace batteries immediately

Battery replacement is recommended after 1 year. The

Remote requires two 1.5V alkaline AAA batteries.

Changing the batteries will not affect the Timer Mode

settings, however, the clock may need adjusting.

Week Timer Heating

2b.28 The following heating periods have been preset, these can

be altered if desired:

From Monday to Friday

06:00 until 08:30

17:00 until 22:00

From Saturday to Sunday

06:30 until 09:30

11:00 until 13:00

17:00 until 22:00

2b.29 Press until shows at the upper right corner of the

screen to enter the week heating mode.

2b.30 Hold the button for 6 seconds to enter the week timer

heating mode setting.

2b.31 Press ‘’ or ‘’ to move the cursor (a flashing underline).

2b.32 Press the button in the corresponding week position to

select (the character is highlighted) or cancel (the character

is displayed normally) the current setting, the same time

period can be selected together.

2b.33 Press the ‘’ button to move the cursor to the time period

setting area.

2b.34 Press ‘’ or ‘’ button to choose hour or minute.

2b.35 Press ‘+’ or ‘-’ to set the number.

A maximum of 3 timed heating periods can be set per day.

Minute increment / decrement by 15min per press.

2b.36 Press to set the heating time for the selected day and

return to the week line.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yeoman CL Electric Range Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info