Bedienungsanleitung Yuneec Tornado CGO4 (Seite 16 von 29) (Englisch)

633004

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

PHOTO STYLE

You can select effects to match the type of image you wish to record. You can adjust the color

and image quality of the effects.

STANDARD / VIVID / NATURAL / MONOCHROME / SCENERY / PORTRAIT

DRIVE MODE

Slide the menu and select Drive Mode. A menu will pop up with two menu items: Normal,

Burst for the photographer to select with.

LIGHT METERING

The photographer can set the light metering method for still for measuring brightness.

[Multiple] This is the method in which the camera measures the most suitable exposure by

judging the allocation of brightness on the whole screen automatically. Usually, we recom-

mend using this method.

[Center Weighted] This is the method used to focus on the subject on the center of the screen

and measure the whole screen evenly.

[Spot] This is the method to measure the subject in the spot metering target.

ZOOM IN / OUT

The photographer can zoom in/out through the following two methods:

Method I: The [ ] icon located on the lower portion of the screen is in charge

of zooming in/out the camera, tap it and a zoom picker will pop up on the screen,

tap ‘T’ to zoom in and ‘w’ to zoom out.

CANTION: Once the [ ] icon is activated, K6 is disabled.

Taking pictures using Burst Mode

Pictures taken with a burst speed of [SH] will be recorded as a single burst group.

Slide the Menu and Select Driving Mode. Focus on the subject and take a picture.

Changing the burst speed

Pictures taken with a burst speed of [SH] will be recorded as a single burst group.

Slide the Menu and Select Driving Mode. Focus on the subject and take a picture.

NORMAL When the shutter button is pressed, only one picture is recorded.

BURST

Recordings are made in succession while the shutter button is pressed

[L] (Low Speed)[M] (Middle Speed)[H] (High Speed)

12(AFS) 7(AFC) 7 2

None Available Available

BURST SPEED(PICTURES/SECOND)

LIVE VIEW DURING BURST MODE

ON: The camera automatically keeps focusing on subjects during recording.

OFF:

The camera maintains the focus position at the start of recording.

Method 2: When the CGO4 is attached to the TORNADO H920, the control knob

(K6) is activated. Users can zoom in by rotating the knob (K6) in the clockwise

direction (the movement speed of the CGO4 gimbal camera in pitch and yaw

directions will become slow in the velocity mode), and vice versa (the movement

speed of the CGO4 gimbal camera in pitch and yaw directions will become fast

in the velocity mode).

CAUTION: Each time the K6 is pushed to a certain position, it should be pushed back to the

middle position to confirm the setting. Otherwise, the gimbal camera will continue to zoom

in/out until it achieves the maximum/minimum value.

ZOOM

zoom

0mm

42mm

14mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yuneec Tornado CGO4 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yuneec Tornado CGO4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info