669800
33
Zoom out
Zoom in
Vorherige Seite
1/39
Nächste Seite
WARNINGS
During the charging process, a specific quantity of electrical energy is charged into
the battery.
The maximum permissible charge current varies depending on the type and performance
of the battery. The relevant information is supplied from the battery manufacturer.
Only batteries that are stated to be capable of quick-charge are allowed to be
charged at rates higher than the standard charging current.
Always refer to the user manual of the battery about the charging methods,
recommended charging current and charging time. Especially, the lithium battery
should be charged according to the charging instruction provided by the manufacturer
strictly. Special attention should be paid to the connection of lithium battery.
Do not attempt to disassemble the battery pack.
Do not use the battery when the battery is humid.
Please pay attention that lithium battery packs can be wired both in parallel and in series.
In the parallel connection: With the total voltage staying the same, the battery’s
capacity is calculated by multiplying single battery capacity by the number of cells.
The voltage imbalance may cause fire or explosion. The lithium battery is
recommended to charge in series.
INSTALLING THE PROACTION™ BATTERY
WARNING: Lithium batteries are significantly more volatile than alkaline, NiCd or
NiMH batteries. All instructions and warnings must be followed exactly to prevent
property damage and/or serious injury as the mishandling of Lithium batteries can
result in fire.
STEP 1) Slide the battery cover / door from the ProAction™ with slight force.
STEP 2) Install the battery in the battery compartment with the side of balancing head
facing upwards. And then connect the Power Connector to the gimbal.
STEP 3) Once you've installed the battery, put the power line inside the compartment.
Slide the battery cover / door downward with slight force and ensure you hear and feel
a noticeable 'click' indicating the battery cover / door has been closed securely.
ATTACHING THE GB603/CGO4 TO THE PROACTION™
ATTACHING THE GB603/CGO4 TO THE PROACTION™
STEP 1) Withdraw the Gimbal Cord from the left side
first, and then securely attach the GB603/CGO4 to the
ProAction™ with Gimbal Fastening Screws, while
ensuring the "Front" label on the Yaw Motor / Top
Motor is facing toward the FRONT of the ProAction™.
STEP 2) Insert the Gimbal Cord into the center carrying
handle port with the side of pins facing upward.
STEP 3) Install the Fastening Accessory Socket to the
Camera (Take Panasonic camera GH4 as examples).
STEP 4) Flip the camera’s LCD screen for better view-
taking, fold out and then fold in.
32
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yuneec Tornado H920 Industry wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info