Bedienungsanleitung Yuneec Tornado H920 Plus (Seite 17 von 40) (Englisch)

669702

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

When the flight altitude of the aircraft is lower

han the desired altitude, it will climb to the desired

altitude

vertically first, then fly back at the current

altitude

and descends vertically within 13-26ft(4-8m)

of the pilot until it automatically lands.

When the flight altitude of the aircraft is higher

han the desired altitude, it will fly back at the

curr

ent altitude, then descend vertically within

13-26ft

(4-8m) of the pilot until it lands

automaticall

Befo

re switching to Home Mode, press the Setting

Calibration

button on the right task column. Select

Home

Altitude and set a altitude as the desired

altitude, and then Home Mode can be activated. The

flight path is as follows:

If H920 PLUS loses the link with the ST16 Ground Station, it will automatically enter

Home Mode.

NOTICE:

If the Ground Station signal is lost, H920 PLUS will automatically return to

home point and hold its position (with a suitable GPS signal/lock) over the home

position (except in instances of low battery, where it will land itself).

PILOT LOCATION

LANDING

LOCATION

8m�(HOME)�

Horizontal�Distance�from�Pilot

Pilot

ADDITIONA

L FUNCTIONS:

If the PAN mode of the gimbal camera is switched to Follow and Follow Pan Controllable

modes, the gimbal TILT angle will be adjusted as the same as the angle what the gimbal

camera is at each waypoint after the pilot set the waypoints automatically and continuously.

When the PAN mode is switched to the Global Mode, the PAN and TILT angle can be

controlled by aileron and elevator stick.

OTICE: The direct distance between every two waypoints should be more than 16 ft./5 meters.

as k MODES

p the TASK/CAMERA icon, the background of 'TASK' will become orange, then the menu

opens

another interface displaying functions: WAYPOINT, CCC (Curve Cable Cam),

Journe

y, POI (Point of Interest), ORBIT ME and TAKE OFF.

If H920 PLUS loses the link with the ST16 Ground Station, it will automatically enter Home Mode.

NOTICE: If the Ground Station signal is lost, H920 PLUS will automatically return to home point and

hold its position (with a suitable GPS signal/lock) over the home position (except in instances of low

battery, where it will land itself).

Before switching to Home Mode, press the Setting Calibration

button on the right task column. Select Home Altitude and set

a altitude as the desired altitude, and then Home Mode can be

activated. The ight path is as follows:

1. When the ight altitude of the aircraft is lower than the

desired altitude, it will climb to the desired altitude vertically

rst, then y back at the current altitude and descends vertically

within 13-26ft(4-8m) of the pilot until it automatically lands.

2. When the ight altitude of the aircraft is higher than the desi-

red altitude, it will y back at the current altitude, then descend

vertically within 13-26ft (4-8m) of the pilot until it lands auto-

matically.

ADDITIONAL FUNCTIONS:

Task MODES

Tap the TASK/CAMERA icon, the background of ‚TASK‘ will become orange, then the menu opens

another interface displaying functions: WAYPOINT, CCC (Curve Cable Cam), Journey, POI (Point of

Interest), ORBIT ME and TAKE OFF.

CCC: (Curve Cable Cam) Curve Cable Cam allows creation of a ight route/mission for

H920 PLUS to y. Once the pilot sets the points, H920 PLUS will y the set coordinates

while remembering the heading.

If the PAN mode of the gimbal camera is switched to Follow and Follow Pan Controllable modes, the

gimbal TILT angle will be adjusted as the same as the angle what the gimbal camera is at each way-

point after the pilot set the waypoints automatically and continuously. When the PAN mode is swit-

ched to the Global Mode, the PAN and TILT angle can be controlled by aileron and elevator stick.

NOTICE: The direct distance between every two waypoints should be more than 16 ft./5 meters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yuneec Tornado H920 Plus Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yuneec Tornado H920 Plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info