669702

Yuneec Tornado H920 Plus Seite 19

19
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
18
After sliding the icon,
the remote control interface will display EXIT and [ ]. Tap the [ ]，
the icon will become [ ]. Then the journey function will be paused. When tapped again, the
[ ] will become [ ], the H920 PLUS will continue the Journey function. Exit the function
by tapping EXIT icon or switching flight mode.
NOTICE:
When the Journey function is activated, the Journey distance may be set by the
pilot.
NOTICE:
The gimbal camera cannot be controlled when journey function is activated and
will remain the previous angle set before. Depending on the camera tilt, the H920 PLUSwill
fly up and out to take the perfect self-shot, or “selfie”.
NOTICE: The journey route is the reverse direction to which the gimbal camera is facing.
1/3
2
ORBIT ME: When Orbit Me is enabled, H920 Plus flies a circular path around the pilot.
Press ORBIT to enter the ORBIT ME function.
START:
Press START, and slide the icon, push the aileron stick to the right or left. The H920
PLUS will fly around the pilot/ST16 with the distance between the start point and the pilot as
the radius.
BACK: Tap BACK to return to the previous interface.
NOTICE: You can increase/decrease radius by apply forward/back on right stick.
You also can trim the gimbal pan position by adjusting pan control knob on ST16 under
Follow or Follow controllable mode in Pan direction..
NOTICE: The tilt direction of gimbal camera can be adjusted by the camera tilt control knob.
NOTICE:
If the aircraft flies too close to the pilot, it will automatically enlarge the distance and
then begin to orbit.
NOTICE: Adjust the Throttle Control joystick to change the height of the aircraft, adjust the
Aileron Control joystick to change the orbit direction of the aircraft.
[ ]: When the pilot tap the [ ]， the icon will become [ ]and the ORBIT ME function will
be paused. When tapped again, the [ ] will become [ ], the copter will continue the ORBIT
ME function. Exit the function by tapping EXIT icon or switching flight mode.
18
After sliding the icon, the remote control interface will display EXIT and [ ]. Tap the [ ], the icon will become
[ ]. Then the journey function will be paused. When tapped again, the [ ] will become [ ], the H920 PLUS will
continue the Journey function. Exit the function by tapping EXIT icon or switching ight mode.
NOTICE: When the Journey function is activated, the Journey distance may be set by the pilot.
NOTICE: The gimbal camera cannot be controlled when journey function is activated and will remain the
previous angle set before. Depending on the camera tilt, the H920 PLUSwill y up and out to take the perfect
self-shot, or “sele”.
NOTICE: The journey route is the reverse direction to which the gimbal camera is facing.
ORBIT ME: When Orbit Me is enabled, H920 Plus ies a circular path around the pilot.
Press ORBIT to enter the ORBIT ME function.
Start: Press START, and slide the icon, push the aileron stick to the right or left. The H920 PLUS will y around
the pilot/ST16 with the distance between the start point and the pilot as the radius.
BACK: Tap BACK to return to the previous interface.
[
]: When the pilot tap the [ ], the icon will become[ ] and the ORBIT ME function will be paused. When tap-
ped again, the [ ] will become [ ], the copter will continue the ORBIT ME function. Exit the function by tapping
EXIT icon or switching ight mode.
NOTICE: You can increase/decrease radius by apply forward/back on right stick.
You also can trim the gimbal pan position by adjusting pan control knob on ST16 under Follow or Follow cont-
rollable mode in Pan direction..
NOTICE: The tilt direction of gimbal camera can be adjusted by the camera tilt control knob.
NOTICE: If the aircraft ies too close to the pilot, it will automatically enlarge the distance and then begin to
orbit.
NOTICE: Adjust the Throttle Control joystick to change the height of the aircraft, adjust the Aileron Control
joystick to change the orbit direction of the aircraft.
18
After sliding the icon, the remote control interface will display EXIT and [ ]. Tap the [ ]，
the icon will become [ ]. Then the journey function will be paused. When tapped again, the
[ ] will become [ ], the H920 PLUS will continue the Journey function. Exit the function
by tapping EXIT icon or switching flight mode.
NOTICE:
When the Journey function is activated, the Journey distance may be set by the
pilot.
NOTICE:
The gimbal camera cannot be controlled when journey function is activated and
will remain the previous angle set before. Depending on the camera tilt, the H920 PLUSwill
fly up and out to take the perfect self-shot, or “selfie”.
NOTICE: The journey route is the reverse direction to which the gimbal camera is facing.
1/3
2
ORBIT ME: When Orbit Me is enabled, H920 Plus flies a circular path around the pilot.
Press ORBIT to enter the ORBIT ME function.
START:
Press START, and slide the icon, push the aileron stick to the right or left. The H920
PLUS will fly around the pilot/ST16 with the distance between the start point and the pilot as
the radius.
BACK: Tap BACK to return to the previous interface.
NOTICE: You can increase/decrease radius by apply forward/back on right stick.
You also can trim the gimbal pan position by adjusting pan control knob on ST16 under
Follow or Follow controllable mode in Pan direction..
NOTICE: The tilt direction of gimbal camera can be adjusted by the camera tilt control knob.
NOTICE:
If the aircraft flies too close to the pilot, it will automatically enlarge the distance and
then begin to orbit.
NOTICE: Adjust the Throttle Control joystick to change the height of the aircraft, adjust the
Aileron Control joystick to change the orbit direction of the aircraft.
[ ]: When the pilot tap the [ ]， the icon will become [ ]and the ORBIT ME function will
be paused. When tapped again, the [ ] will become [ ], the copter will continue the ORBIT
ME function. Exit the function by tapping EXIT icon or switching flight mode.
… 19 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yuneec Tornado H920 Plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Yuneec Tornado H920 Plus

Yuneec Tornado H920 Plus Kurzanleitung - Deutsch - 2 seiten

Yuneec Tornado H920 Plus Bedienungsanleitung - Deutsch - 40 seiten

Yuneec Tornado H920 Plus Kurzanleitung - Englisch - 2 seiten

Yuneec Tornado H920 Plus Bedienungsanleitung - Französisch - 40 seiten

Yuneec Tornado H920 Plus Kurzanleitung - Französisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info