Attention!
It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily
accessible after installation.
Building-in
Dimensions of the recess
Height of housing (1)
880 1225 mm
Depth of housing (2)
550 550 mm
Width of housing (3)
560 560 mm
It is necessary that the niche is provided with a conduct of
ventilation having the following dimensions:
Depth 50 mm
Width 540 mm
For appropriate venting, follow indications in the figure.
1. Fit the appliance in the niche by making sure that it
stands against the interior surface of the unit on the side
where the door hinges of the appliances are fitted. Insert
the appliance until the upper strip butts up against the
unit (1) and make sure that the lower hinge is in line with
the surface of the unit (2).
2. Open the door and push the appliance against the side of
kitchen furniture opposite to that of the appliance hinges.
Fasten the appliance with 4 screws (I) provided in the kit
included with the appliance.
3. Press in the joint covers between the appliance and
the kitchen furniture.
42
GB
