Bedienungsanleitung Zelmer 13Z011 (Seite 227 von 228) (Englisch, Polnisch)

538892

227

Zoom out

Zoom in

Vorherige Seite

1/228

Nächste Seite

227

19. Troubleshooting

No. Problem Action

The coffee does not ﬂ ow from the

head after pressing the button

(A)

or (B) or (C) , the

sound of the pump is louder than

usual.

Check if the water tank (3) is inserted properly, check if there is water in

the tank (3), ﬁ ll the tank with water (see section 6) without pressing any

button, turn the steam knob (13) to the position after about 30 seconds.

Next, turn the steam knob (13) to the OFF position. The problem should be

solved.

The coffee does not ﬂ ow from the

head after pressing the button

(A) or (B) or (C) , the

sound of the pump is quieter than

usual. The display shows the mes-

sage WATER FLOW ERROR.

Unplug the coffee maker, clean the brewing head unit (14) – see section

4. Next prepare a large cup of coffee according to section 12.3. If the cof-

fee ﬂ ows properly, the problem has been solved.

The brewed coffee is too weak or

does not differ much from fresh

water.

Check if there are coffee beans in the container (4). Clean the ground cof-

fee inlet channel. Check the position of the knobs (10) and (11).

4. No steam emission Clean the steam nozzle (16) – see section 18.9.

Water is in the bean coffee con-

tainer (4).

Immediately switch off the coffee maker. Do not use the coffee maker until

you wipe the surface of the bean coffee container (4) dry using a water ab-

sorbing cloth. The problem should be solved. Otherwise return the coffee

maker to the nearest service point.

The sound of the operating brewing

head unit (14) is louder than usual,

but the brewing head unit can be

removed.

There might be foreign objects in the lower part of the brewing head unit

(14). Switch off the coffee maker. Take out the brewing head unit (14) –

see section 4. Clean the brewing head unit.

The sound of the operating brewing

head unit (14) is louder than usual,

but the brewing head unit cannot be

removed.

Step 1: Switch off the coffee maker with the switch (2).

Take out the dregs box (22) and close the service door (15).

Step 2: Switch on the coffee maker with the switch (2).

Press and hold the (B) button until the appliance starts to operate.

Step 3: When the appliance stops to operate, switch off the coffee maker

again with the switch (2) and take out the brewing head unit (14) – see

section 4.

Step 4: Clean the whole brewing head unit (14) thoroughly. Check its start-

ing position (correct in case of an improper setting) and install in the coffee

maker – see section 4. Switch on the coffee maker once again with the

switch (2).

The problem should be solved. Otherwise return the coffee maker to the

nearest service point.

In case of other defects or problems remember not to attempt to remove them yourself. In such a case contact

a qualiﬁ ed service point employee.

ECOLOGY – ENVIRONMENT PROTECTION

Each user can protect the natural environment. It is neither difﬁ cult nor expensive.

In order to do it: put the cardboard packing into recycling paper container; put the polyethylene (PE) bags into

container for plastic.

When worn out, dispose the appliance to particular disposal centre, because of the dangerous elements of this

appliance, which can be hazardous for natural environment.

Do not dispose into the domestic waste disposal!!!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 13Z011 Seite 227

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info