538920

Zelmer 23Z011 Seite 63

63
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
63
Ventilation
1. During the ventilation mode the appliance will only adjust the air ow which means that the air owing into the room will not be cooled or
dehumidied.
2. Repeatedly press the MODE (D) button on the control panel or the MODE (18) button on the remote controller and choose the ventila-
tion mode. The LCD display should show the FAN indicator. During the ventilation operation always place the air inlet and exhaust hose
outside the room e.g. through an open window.
3. The appliance cannot operate as a ventilator in a closed circulation without receiving air from the outside, therefore it is necessary to
install the air inlet duct.
4. Press the FAN SPEED (B) button on the control panel or the FAN SPEED (21) button on the remote controller to select the desired fan
speed: HIGH, MED, or LOW.
AUTOMATIC SWITCH ON / SWITCH OFF USING THE CONTROL PANEL
In order to set the automatic switch on press the TIMER (A) button, the LCD display will show the symbol „ ”. Repeatedly pressing
the TIMER (A) button set the time after which the air conditioner is to switch on. Each time you press the TIMER (A) button, the value will
increase by one hour. The setting range is 1–12 hours.
In order to set the automatic switch off of an operating appliance, press the TIMER (A) button, the LCD display will show the symbol „ ”.
Repeatedly pressing the TIMER (A) button set the time after which the air conditioner is to switch off. Each time you press the TIMER (A)
button, the value will increase by one hour. The setting range is 1–12 hours.
Note: Pressing the TEMP+ and TEMP- together for more than 2 seconds will lock the buttons. The LCD display will show the sym-
bol . Press both buttons together again to unlock the buttons. The symbol will disappear from the display.
AUTOMATIC SWITCH ON / SWITCH OFF USING THE REMOTE CONTROLLER
In order to set the automatic switch on time press the TIMER (19) button. The LCD display of the remote controller will display the „
” symbol and the last used switch on time in the 1–12H format. Example: „4H” means that the appliance will automatically switch on in
4 hours.
In order to set / adjust the automatic switch on time press the HOUR (27) button. Each time you press the HOUR (27) button, the value will
increase by one hour in the range from 1 to 12. When 12 is reached, the value will return to 1 the next time you press the HOUR (27) button.
In order to set the automatic switch off of an operating appliance using the remote controller, press the TIMER (19) button, the LCD display
will show the symbol „ ” and the last used switch off time in the 1–12H format. Example: „4H” means that the appliance will automati-
cally switch off in 4 hours.
In order to set / adjust the automatic switch off time press the HOUR (27) button. Each time you press the HOUR (27) button, the value will
increase by one hour in the range from 1 to 12. When 12 is reached, the value will return to 1 the next time you press the HOUR (27) button.
WATER DRAINAGE METHODS
ATTENTION: One of the following drainage methods is suitable for your unit. Please check to refer the identical one and drain the
water to proper position.
Method 1: Water drainage pump function – automatic water drainage
1. Under random mode if the water level in the water container is LOW, the water pump and recycle pump will not work, the air conditioner
operates in the set operation mode.
2. If the water level in the water container is NORMAL, the recycle pump will work, water pump will not work and the he air conditioner oper-
ates in the set operation mode.
3. If the water level in the water container is HIGH, the water pump will work for 10 minutes. After that if the water level is on LOW/NORMAL
level, the appliance will continue to operate in the set mode. If the water level continues to be on a HIGH level, the water pump will stop
working and the appliance will switch off. The WATER FULL (G) control lamp on the control panel will illuminate and the LCD display will
show failure code E5. Twist off the release stopper and empty the water container.
Method 2: Manual water drainage
When the water level in the water container is on HIGH level, the appliance will stop working and the WATER FULL (G) control lamp will il-
luminate on the control panel. The LCD display will show failure code E5. Simultaneously press the SWING (E) and TIMER (A) buttons for
more than 2 seconds. The water will be drained out by the drainage hose on the back of the appliance. When the water level drops to LOW,
the appliance will stop draining water. Press the ON/OFF (H) button to continue former operation mode.
CLEANING AND MAINTENANCE
1. Unplug the appliance before cleaning.
2. Do not use abrasive detergents such as emulsions, cream cleaners, polishes, etc. to clean the housing. They may remove the graphic
information symbols.
3. Wipe the housing with a damp cloth.
4. If the air lter is blocked with a large amount of dust, the air ow volume will be reduced. Clean the air lter every two weeks.
Opening and cleaning the air lter
1. Pull the lter directly upwards – see picture.
2. Wash the air lter by immersing it gently in warm water (about 40ºC) with a neutral detergent.
3. Rinse the lter and dry in a shady place.
4. Attach the lter back to the appliance.
BEFORE THE START OF THE SEASON
1. Check if the air inlets and outlets are not blocked.
2. Make sure the air lter is properly installed before operating the air conditioner. If the air lter is re-
moved, dust and other foreign objects may cause the improper functioning of the appliance.
Water
Container
Water
High level
Normal level
Low level
Air lter
Pull the air lter
directly upwards
… 63

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zelmer 23Z011 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info