Bedienungsanleitung Zelmer 29Z016 (Seite 64 von 68) (Englisch, Polnisch)

538935

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

SETTING THE OVEN FUNCTIONS

After plugging you will hear a beep and the display will turn on. If you press

any button or turn the knob (7) the system will start running in the standby

mode and will wait for the time to be set on the digital display (turn the

knob (7) right) and the menu to be selected (turn the knob (7) left). If no

action is taken the display will start to run in a standby mode after a few

minutes and no items shall be displayed.

1. Setting the clock

The clock can be set in a 12 or 24 hour mode. To set the current time in

the standby mode:

Plug in the appliance to a grounded electrical outlet. –

Press and hold the – DEFROST/CLOCK (5) button for 3 seconds.

The clock indicator will begin ashing. –

The display will show Hr24. –

Press the – DEFROST/CLOCK (5) button to set the 12 hour mode.

Press the – DEFROST/CLOCK (5) button again to set the 24 hour mode.

Turn the – knob (7) right to set the hour.

Conrm by pressing the – DEFROST/CLOCK (5) button.

Turn the – knob (7) right to set the minutes.

Conrm by pressing the – DEFROST/CLOCK (5) button.

The set time will be displayed. –

2. The steam generator

a) Steam generator use

Steam which is blown into the inside of the oven is generated in a special

water container (which is an integral part of the oven). This is a unique so-

lution on the Polish market, as steam is generated inside the oven. Other

ovens (which are advertised as having the function of steam cooking) only

have a closed container attached in which steam is generated.

Some advantages:

It’s easy to prepare food (e.g. steamed potatoes, frozen vegetables, –

etc.)

The food is not soaked with fat as when fried (over 60 of fat from the –

pan is absorbed during frying!)

Minerals and vitamins are not rinsed by water (even 75% of vitamin C –

gets wiped out!) and do not get over to the stock as in case of cooking.

Food does not get burned, does not stick to the dish, does not lose –

the color and smell and it retains an appetizing consistency, because it

does not dry out and is not soaked with water.

b) Water container installation

Warning: We advise you to wash the water container (3) and its lid (1)

before initial steam cooking to be sure they are clean. Steam genera-

tor parts (see illustration):

Water container lid – (1).

Water container – (3).

Minimal water level sensor – (2).

Water level indicator – (5).

Open buttons – (4).

Water container housing – (6).

Attention: Do not immense the water container (3) in water or any oth-

er liquid. Do not wash the water container (3) under running water. If

the sealing surfaces and/or generator housing (the lower part of the

container) get wet, leave to dry thoroughly before using.

Pour only “normal” tap water to the container (3).

The water level in the container (3) should be in the MIN-MAX range.

Make sure the oat is properly functioning before you properly install

the water container lid (1).

Make sure there is enough water in the water container (3) and that it

is properly installed before using the steam function. To not open the

water container lid (1) when the appliance is operating in the steam

cooking mode. Do not open the water container after operation to

avoid burns or other hazards.

After you hear a beep indicating the end of operation, wait a while

before you pour water into the appliance. Carefully lift the water con-

tainer lid (1) and pour water using a cup. Do not pour water or hold

the lid (1) during cooking or directly afterwards.

The water in the container should not be used longer than 24 hours.

If the microwave oven is stored in temperature below 0°C pour water

out of the container.

The oat should be regularly cleaned. Do not take out or turn the oat

during cleaning. Wait for the water container (3) to cool before cleaning.

Do not touch surfaces that heat quickly in order to avoid burns.

If there is water in the water container (3) pay attention not to spill it

while moving the appliance.

To take out the water container lid (1) press the two open buttons (4) on

the top towards each other and lift the lid. Next take out the water con-

tainer (3) by pulling the protrusion on the side upwards.

After cleaning the container (3) and the lid (1) insert the container back

to the housing (6). To install the water container lid place the lid (1) in

the container (3) and press. Make sure the fastening hooks (A) properly

click into place on both sides of the water container, because otherwise

the steam cooking function cannot be started and the steam will escape

through the outlet opening of the container.

c) Water trough (3) installation

Before you use the steam cook-

ing function make sure the

water trough (2) is properly

installed in the microwave oven.

Empty the water trough (2) if

it is lled with water. Use a dry

cloth or take out the trough. To

take out the water trough:

Open the – oven door (1) as

widely as possible.

Press two – buttons (C) and

slowly take out the trough.

After taking out and empty- –

ing the water trough (2) in-

stall it once again.

Water trough installation:

Open the – oven door (1) as

widely as possible.

Direct the – clasps (B) on the trough (2) to the square openings (A) on

the bottom of the oven and put the trough into place.

3. Steam cooking

Open the water container (1) lid and –

using a cup pour a sufcient amount of

water into the container. Next, close the

lid (the lid must be closed otherwise the

steam cooking function will not start).

Attention: The amount of water cannot ex-

ceed the MAX level and cannot be lower

than the MIN level on the water level indi-

cator (2).

If the water level is too low you cannot start

the steam cooking or you will have to add

water shortly. On the other hand if the water

level is too high the water can spill over to

the inside of the oven.

Plug the oven, open the door and place the food to be cooked in the –

middle of the bottom plate inside the oven and close the door.

Select steam cooking – STEAM MICRO (2), the icon 1S and will be

displayed.

Next, turn the – knob (7) to select the time (10s-30min.).

Press – START (7) to start cooking.

In order to set the oven to cook for 12 minutes using this function:

Press – STEAM MICRO. (2).

Turn the – knob (7) to set 12 minutes.

Press – START (7).

Zelmer 29Z016 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info