538929

Zelmer 41Z012 Seite 47

47
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
47GW41-001_v01
PLUGGING TO A POWER SOURCE
1. Place a compatible utensil on the induction stove.
2. Plugging the cooker to a power source is signalized by a single sound
signal. At this time all functional indicators, as well as the heat power
indicator will ash for a second before going off. The power on/off
indicator will be ashing. The only key working at that stage is the
power on/off button – the rest of the keys remain disabled.
3. When the cooker is plugged to a power source, push the power on/off
button. You will hear a single sound signal and the display panel will
indicate “----”. The cooling fan is now off, which means that the cooker
is now ready for use. If within one minute from plugging the cooker you
do not use the cooker in any way, the device will automatically turn
itself off signaling it with a sound.
4. Within one minute after pressing the power on/off button you can select
a function by pressing the MENU selection key. The selected function
will lit on the display panel. If within one minute from plugging the
cooker you do not activate any function, the device will automatically
turn itself off.
5. If there is no utensil on the induction cooker after selecting a function,
you will hear a pulsating sound signal. The display panel will indicate
an “E1” error code symbol. The function indicator will lit permanently
and the heat power indicator will be pulsating. If within one minute
no utensil will be put on the cooker, the device will automatically turn
itself off. If, however, within that minute a utensil will be placed on the
cooker, the device will check whether the utensil is compatible and after
3 seconds will start the assigned cooking function.
OPERATION INSTRUCTIONS
ATTENTION: Always use a vessel intended for induction cooker,
adequate to each function described below. The diameter of the
inductive utensil bottom should be 12-24 cm.
Boil water function
1. Turn on the cooker by pressing the power on/off button. Using the
MENU key select the Boil water function. The boil water function
indicator will lit up. Maximum power is used for the process of boiling
water, consequently the display panel will show the power level of
“2000”. Power (W) indicator will be lit.
As long as the boiling process continues, all the heat power indicators
will be on. Other indicators will remain off. The Boil water function may
be changed to other functions by pressing the MENU key.
2. If, during the boiling process, a utensil will be taken off the induction
cooker or it will not be there in the rst place, the device will automatically
turn itself off.
3. To set time for the boiling process, press the TIMER key (you can select
from 00:01 to 23:59 minutes). The set time will be counting down on the
display panel. If the settings were not changed, the default time will
be 15 minutes (in such a case the display panel will show power and
not time). Furthermore, if you change the time settings, the Power (W)
indicator will not be lit up and the heat power indicators will ash on
a rotation basis from left to right until the process is over.
4. In order to check the level of power, press the MENU key. Power (W)
indicator will lit up and the display panel will show information about
the power level. After ca. 5 seconds the display panel will go back to
showing timer countdown.
5. After the completion of the process, you will hear a sound signal and
the device will automatically turn itself off. The function does not support
the Keep warm mode. You will be informed about the end of the boiling
process by a ten-times sound signal.
6. At any moment the cooker may be turned off by pushing the Power on/
off button.
Heat milk function
1. Turn on the cooker by pressing the Power on/off button. Using the
MENU key select the Heat milk function. The Heat milk function
indicator and the Power (W) will lit up. Furthermore, four LED on the
display panel, as well as all heat power indicators will ash on a rotation
basis from left to right until the process is over. All other indicators will
be inactive.
2. In this function the device controls both power and temperature. It is not
possible to adjust them (no reaction to pressing the “+” or “-” keys). The
Heat milk function may be changed at any time to other functions by
pressing the MENU key.
3. The function is set for ca. 15 minutes. You will be informed about the
end of the process by a ten-times sound signal. The cooker will check
the temperature inside the utensil. When it reaches 60°C to 80°C, the
cooker will automatically go into the Keep warm mode. The LED on the
display panel will form a “b” symbol. After 2 hours the Keep warm mode
will be turned off.
4. The Power (W) indicator will be lit throughout the process. If you take
the utensil off the cooker or it will not be there, the indicator will go off.
Putting the utensil on the cooker will automatically result in turning the
Power (W) indicator on.
5. At any moment the cooker may be turned off by pushing the Power on/
off button.
Chafing dish function
1. Turn on the cooker by pressing the Power on/off button. Using the
MENU key select the Chang dish function. The Chang dish function
indicator and the Power (W) will lit up. The default power of the function
is “2000”. All power indicators will be will up. Press the “+” or “-” keys
to increase or decrease the power level. You can choose power from
the following levels: 100, 300, 600, 800, 1000, 1200, 1400, 1600, 1800,
2000. The Chang dish function may be changed at any time to other
functions by pressing the MENU key.
2. To set time for the process, press the TIMER key (you can select from
00:01 to 23:59 minutes). The time set will be counting down on the
display panel. If the settings were not changed, the default time will
be 15 minutes (in such a case the display panel will show power and
not time). Furthermore, if you change the time settings, the Power (W)
indicator will not be lit up and the heat power indicators will ash on
a rotation basis from left to right until the process is over.
3. In order to check the level of power, press the MENU key. Power (W)
indicator will lit up and the display panel will show information about
the power level. After ca. 5 seconds the display panel will go back to
showing timer countdown.
4. The automatic anti-overheating safeguard is set to 340°C ±20°C.
If a sensor indicates that the temperature has reached the maximum
safety level or there is a short-circuit, the cooker will automatically turn
off. The display panel will show an “E6” error code symbol. Furthermore,
if there is no water in the utensil, the cooker will automatically turn
itself off within 3 minutes. When the power is at its maximum level, the
cooker will disable the “+” key. Consequently, when the power is at its
minimum level, the cooking will not respond to pressing the “-” key.
5. The function does not support the Keep warm mode. You will be
informed about the end of the process by a ten-times sound signal.
6. At any moment the cooker may be turned off by pushing the Power on/
off button.
… 47 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Zelmer 41Z012 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Zelmer 41Z012

Zelmer 41Z012 Bedienungsanleitung - Englisch, Polnisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info