Bedienungsanleitung Zelmer 477 (Seite 64 von 66) (Englisch, Polnisch)

540086

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Technical specications

Technical parameters are indicated on the appliance’s name

plate.

Admissible continuous operating time of the motor with

15 minutes

A break between successive uses 30 minutes

A break between successive turbo uses 10 seconds

The appliance’s noise level (L

) 75 dB/A

Speed range I gear, II gear

The juice extractor type 477 is constructed in II class

insulation .

It does not require connection to the grounded socket.

ZELMER appliances meet the requirements of effective

standards.

The appliance meets the requirements of the following

directives:

Low Voltage Device (LVD) – 2006/95/EC. –

Electro-Magnetic Compatibility (EMC) – 2004/108/EC. –

The product is marked with CE symbol on the name plate.

Construction of the appliance (Fig. A)

Motor

power on/off button

gear 1 – gear 2 / turbo button

indicator light

pulse button (does not apply in case of juice extractor)

skimmer

sucker

power supplying cord

Juice container

spout

cover

Body of the juice collector

Strainer

Lid

Clamps

Pusher

Pulp container

Preparation of the juice extractor for

operation (disassembling) (Fig. B)

Before using the juice extractor for the rst time, disassemble

it and wash parts in contact with the processed product.

Place the juice extractor near the socket on the rm,

clean and dry surface.

Pull down the clamps (6) so that the tracks moved out of

grooves of the lid (5).

Take the pusher (7) and the lid (5) out.

Then remove the juice collector (2) including the body

(3) and the lter (4). To this end, turn the body (3) right

(clockwise) to the limit and raise the body with the juice

collector and the lter.

Finally, disassemble the juice collector (2) from the body (3).

Wash the disassembled parts (except the motor unit)

●

carefully in hot water and wash-up liquid. You can also

clean them in a dishwasher in max temp. 60°C (except

for the strainer and the motor unit). After drying them

carefully, start assembling the clean parts.

Preparation of the juice extractor for

operation (assembling) (Fig. C)

Put the body of the juice collector (3) on the motor unit

so that a clamp (6) is placed slightly on the left of the buttons

on the motor and turn left to the limit (anticlockwise) so that

a clamp is placed over the buttons.

Put the juice container (2) on the body (3) so that the lip

(h) was placed in the cutting of the body (3).

Put the lter (4) inside, press it slightly and check if it is

well mounted and rotates easily.

Put the lid (5) and close the clamps (6).

INFORMATION ON FRUIT AND VEGETABLES

Fruit/vegetables Centrifuging speed Fruit/vegetables Centrifuging speed

Pineapples II Carrots II

Blueberries I Melons I

Peaches I Apricots I

Beetroots I Nectarines I

Pears I Cucumbers I

Apples I Kiwi I

Cabbage II Tomatoes I

Fennel I Celery II

Raspberries I Grapes I

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 477 Seite 64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info