Bedienungsanleitung Zelmer 477 (Seite 65 von 66) (Englisch, Polnisch)

540086

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Put the pusher (7) to the feeding tube.

Insert the pulp container (8) under the lid (5) in the

following way: lean the pulp container and place it under

a cover of the juice collector (3) and the lid (5), and next push

it towards the motor (1).

Place the juice collector under the lip (h).

Place washed fruit and vegetables prepared for juice

●

extraction near the appliance.

Start-up of the juice extractor

and operation (Fig. E)

Plug the juice extractor.

The appliance has an additional protection. If it is

plugged and the button power (a) is on and if the

switch is pulsating red, it means that either the body

(3) or the clamps (6) were improperly placed on the lid.

In such a situation the appliance cannot be started.

Check again whether the assembly is proper until the

lamp (c) turns blue.

Press the button power (a) – the juice extractor will

operate on gear 1 and the control lamp will turn blue. It is

a gear recommended for fruit.

If you need operations on gear 2 (high rotation for hard

fruit like carrots, celeries, beetroots, apples, etc.), press (for

a short time, max. 2 sec.) the button (b) – the lamp (c) will

shine red with a continuous light. If it is necessary to return

to gear 1, press for a short time the button (b) and the juice

extractor will return to gear 1, the control lamp will shine blue

with a continuous light.

The juice extractor always start working on gear 1.

An examplar table containing detailed information

about selecting a relevant gear for specic fruit and

vegetables may be found on page 66.

Put fruit or vegetables of relevant size into the feeding

●

tube (if necessary, they should be cut into pieces of

relevant size) and press them slightly with the pusher.

You must not push the products with your ngers or

other objects.

In case of the necessity (in case of excessive accumulation

of the pulp on the lter, which causes juice extractor vibrations)

you can use turbo button. To this end, press the button (b)

for a longer time (about 3 sec.). The engine operates in such

a case on maximal rotation for approximately 2 seconds. After

this time, the turbo function switches off automatically, and the

engine returns to previous rotation.

ATTENTION! Repeated usage of turbo function can

take place after min. 10 seconds.

Do not overload the appliance with extensive amount

of product or do not push it to strong (with a pusher),

because a sudden increase of juice amount in the bowl

spout can cause the juice overow out of the lid or into

pulp collector.

After operation (centrifuging of juice) (Fig. D)

Switch the juice extractor off, turning the button (a), the

lamp (c) will go out.

Unplug the appliance.

After the engine stops, start to disassemble the juice

●

extractor in order to wash the parts (see „Preparation of

the juice extractor for operation”).

Remove the accumulated pulp from the pulp container

●

(8).

Prevent the excess of the pulp container (8). The

excessive pulp can pour out while leaning the

container during removing.

Juice extractor maintenance rules

Clean the juice extractor carefully after each usage, to

●

prevent drying of juice and fruit remains.

Remove the dirt from the corners with a bottle brush or

●

tooth brush.

Clean the motor with a damped cloth sprinkled with

●

washing up liquid. Then dry it.

When water or juice gets into the motor, stop operation

and bring the appliance to the service centre for

inspection.

The following elements of the equipment: the juice

●

collector (2), the lid (5), the pusher (7) and the pulp

container (8) should be washed in hot water with

wash-up liquid.

You can also clean them in dishwashers in maximum

●

temperature 60°C.

The exception is the lter

●

(4). It should be washed with

a hard brush only. Do not use any metal brushes to

clean the lter!

As a result of a long use of the appliance, some plastic

●

elements can change their colour. Do not treat it as

a defect.

Colour from carrots can be removed by cleaning the

●

surface with a cloth moistened with edible oil.

Dry carefully all parts after cleaning.

●

Assemble the juice extractor according to the instructions

●

described above (see “Preparation of the juice

extractor for operation”).

Roll the supplying cord inside the compartment located

●

in the base of the juice extractor motor.

Pay special attention to transparent plastic parts.

They are sensitive to hits and falls. They may easily

be damaged then.

What to do when …

The appliance does not work:

Plug another appliance into the socket and check whether –

it works properly.

Return the appliance to authorized service facility. –

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 477 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info