Bedienungsanleitung Zelmer 986 (Seite 71 von 74) (Englisch, Polnisch)

538959

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Description (Fig. 1)

The food mincer consists of:

Mincer motor – each motor is adapted to install each

ZELMER mincing unit, citrus juicer, juicer, coffee grinder and

shredder.

The mincer unit consists of:

I. Mincer body

II. Scroll with clutch

III. Cutter

IV. Mincer screen with 4mm openings

V. Ring nut

VI. Tray

VII. Pusher

And additional accessories:

VIII. Base plate

IX. Sausage ller nozzle

X. Mincer screen with 8mm openings

XI. On/Off button.

XII. „Reverse” switch

Mechanical safety device for the motor (Fig. 2)

I. Scroll

II. Clutch

III. Screw M5x20

The mincer is equipped with a mechanical safeguard, which

protects the motor against damage – the teeth in the clutch

break when the mincer is overloaded (e.g. when bones get

inside).

Replace the damaged clutch:

twist off the screw from the scroll with the damaged clutch,

●

remove the damaged clutch,

●

attach the new clutch and tighten it with the screw.

●

„Reverse” function

The motor has a special function allowing to temporarily

change the direction of the scroll. It is used if mincing is

limited and/or if there is too much product in the mincer body

(the scroll does not take the product). Press the „R” switch

for a short period of time, the product will be removed from

the inside of the mincer body. Press the „I” button once

again to continue operation.

If the scroll is still blocked by the excess of product, use the

„R” switch once again, remove the product from the mincer

body and next remove product parts which make it difcult to

mince (e.g. sinews, etc.).

In some cases it is necessary to dismantle the mincer body

and remove the above-mentioned obstacles.

Preparing the appliance for operation and

switching on the appliance

Take out a sufcient length of the supply cord and the

appropriate accessories from the compartment.

Place the motor near the socket, on a hard, stable

●

surface. Do not cover the ventilation openings of the

housing.

Open the compartment on the back of the housing and

●

take out an appropriate screen.

A screen with 4mm openings is installed in the mincer body

as a standard.

Wash all accessories thoroughly before the initial use.

●

Assemble the appropriate accessories and install them

●

on the motor.

Plug in the appliance.

●

Switch on the appliance using the

●

„I” switch (the

appliance starts to operate after about 2 seconds).

TYPES OF ZELMER MINCERS

Typ 986

Accessories

Mincing unit Citrus juicer Shredder Juicer Quern grinder

Pasta and pastry set

(only for 986.5x)

986.50 / 986.80

● ● ● ● ●

●/

–

986.52 / 986.82

● ○ ○ ● ○

●/ –

986.53 / 986.83

● ● ● ● ○

●/

–

986.54 / 986.84

● ○ ● ○ ○

●/ –

986.56 / 986.86

● ● ● ○ ○

●/

–

986.57 / 986.87

● ● ○ ○ ○

●/

–

986.58 / 986.88

● ○ ○ ○ ○

●/

–

986.88MMSL

Mincing unit with

a metal tray and

3 screens: 2,7; 4; 8

–

○

– – –

986.84MMSL

●

● – basic accessories, ○ – additional equipment, which you can buy in shops,

–

– unavailable accessories

The mincer is equipped with one mincing unit.

The manual and the description concerning the pasta and pastry set is additionally included to mincers equipped with this set.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 986 Seite 71

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info