Bedienungsanleitung Zelmer 986 (Seite 74 von 74) (Englisch, Polnisch)

538959

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

IMPORTANT: The devices cannot operate without

loading. Each time before staring the device, ll it up

with product.

Put the corns into the pan (VIII), set up the handle of the

body (III) on the thicker grinding, set up the machine engine.

The grinded product will start pouring out through the hole.

Regulate the quern regulator (II), depending of the demanded

grinding level or using seeds, with the handle of the body for

obtain the product with the adequate granulation level.

By turning it clockwise you will get the ne grind product.

By turning it counter-clockwise – the thick grind product.

The nest (minimal) grinding level is achieved by setting it

up with the handle on the line 1, and the hugest (maximal)

by setting it up with the handle on the STOP line. See the

graphic on the body (III) and quern regulator (II).

Too strong twisting or turning of the handle out of STOP

line during the work time can cause the device failure.

CAUTION: It` s recommended to set the quern

regulator during the grinder work time between the

line 1 and STOP line.

IMPORTANT: It`s FORBIDDEN to use the REVERSE

function in the machine when the grinder is installed.

CAUTION: Remember about the accurate washing the

grinder before grinding of the different products. It will

permit to avoid the mutual penetration of odors.

CAUTION: For the soft corns as oat or linseed it`s

necessary to select the coast-grained set up.

ATTENTION! Do not look into the grinding chamber

during operation, as the beans which pop out

sometimes, can hurt you (i.e. your eye).

Cleaning and maintenance

The grinder does not requires the cleaning after each

operation (if it`s grinded one kind of product), cause the

worm prevents falling the seeds residues into grinder. Dry

the steel quern (4, 5) using a soft cloth after cleaning to

prevent corrosion. In case of long-term storage, conserve

the quern by greasing them (you can use edible oil). Do

not immerse the quern into boiling water. The part of plastic

(don`t containing the graphic) can be washed in the dish-

washer (max. of 60°C).

After operation (Fig. 11)

Switch off and unplug the appliance.

●

Remove the pusher and take out the tray from the mincer

●

body, the shredder body or the juicer body (in case of the

citrus juicer separately remove the squeezer and screen).

Press the lock button

●

(1), turn (2) the mincing unit, the

shredder body (or the citrus juicer bowl) to the right and

remove it.

In case of the citrus juicer take out the clutch from the

●

motor.

The manufacturer does not accept any liability for any damages

resulting from unintended use or inappropriate handling.

The manufacturer reserves his rights for modifying the product any

time in order to adjust it to law regulations, norms, directives, or due

to construction, trade aesthetic or other reasons, without notifying it

in advance.

Dismantle the elements of the mincing unit, the body with

●

the sausage ller nozzle, the juicer body or the shredder.

Store the clean and dry screens in the compartment. In

●

order to do so:

Open the compartment on the back of the housing. ●

Press the compartment lock on both sides and pull ●

(as shown earlier).

(3) ● Store up to two screens and close the compartment

and the back lid (4).

(5)

●

Put away the cord, pushing it gently through the

opening.

(6)

●

Place the plug in the compartment.

Cleaning and maintenance

Wipe the motor with a damp cloth with dishwashing

●

liquid.

Wash plastic elements in warm soapy water or in the

●

dishwasher according to the denotations.

Wash metal elements in hot soapy water.

●

Dry all elements thoroughly.

●

Grease the screens and cutter with cooking oil to protect

●

from rusting.

Assemble dry elements of the mincer body or the

●

shredder.

Ecology – Environment protection

Each user can protect the natural environment.

It is neither difcult nor expensive.

In order to do it: put the cardboard packing into

recycling paper container; put the polyethylene

(PE) bags into container for plastic.

When worn out, dispose the appliance to particular disposal

centre, because of the dangerous elements of this appliance,

which can be hazardous for natural environment.

Do not dispose into the domestic waste disposal!!!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer 986 Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info