Bedienungsanleitung Zelmer AH1500 (Seite 52 von 54) (Englisch, Polnisch)

539210

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

56 AH1500-001_v01

AUTOMATIC STEAM SHUT-OFF

The humidier has an automatic steam off function, which

will be activated in the following cases:

a) If during operation of appliance the water level drops

below the required level, a safety switch automatically

stops the appliance operation, preventing it from

overheating. At the same time you will hear a triple beep,

the operation indicators on buttons will ash, reminding

of the need to ll the water tank.

In the sleep mode, only the symbol „ ” is

blinking on the LCD.

If within one minute, the water tank is not lled, the air

humidier automatically turns off.

If at the time of lling the water tank the

appliance will automatically switch off, after

installing the water tank on the humidier’s

base, press the “ON/OFF” button to restart the

appliance.

b) During operation, removing the water tank or incorrect

installation of the tank on the base of air humidier

will launch a safety switch that automatically stops

the appliance, preventing it from overheating. If within

15 seconds the water tank will not be placed on the

humidier’s base, you will hear three beeps and the

indicators on the buttons will ash.

In the sleep mode, only the symbol „ ” is

blinking on the LCD.

After placing the water tank on the humidier’s base, the

appliance within 3 seconds will return to normal operation

mode. However, if within one minute the water tank will not be

placed on the humidier’s base, the appliance automatically

turns off.

If the appliance was automatically switched

off after installing the water tank on the

humidier’s base, press the “ON/OFF” button

to restart the appliance.

DRAINING THE BASE OF HUMIDIFIER

Turn the appliance off by pressing the “ON/OFF” button

and unplug the power cord from the wall outlet.

Remove the water tank from the base of the humidier,

lifting it up with the handle.

Empty the base of the humidier removing the

accumulated water (as shown in the photo).

Pouring water out in the wrong way may result

in water entering the outlet of the fan and

consequently cause serious damage to the

humidier.

If water gets into the fan outlet, contact your

service center.

Between 60-85% RH - the amount of generated steam –

is being reduced, on the “MODES” button one operation

indicator shall fade,

Above 85% RH - production of steam shall be ceased , –

the display shows “H% RH”. When the level of humidity

in the room drops to 60% RH, the appliance shall resume

production of steam.

The “MODES” button is used to manually select the

operation mode. When the appliance is started, pressing

a single button will switch from automatic mode to manual

mode, while reducing the amount of generated steam (the

operation indicator on the “AUTO” button and one segment

of the indicator on the “MODES” button shall fade). Pressing

the button again starts the function of sleep and shall reduce

the amount of generated steam (the second segment of

indicator on the “MODES” button will fade and the display

will show the symbol „ ”).

During the sleep function you cannot control

the amount of generated steam. Pressing any

button (except the “ON/OFF”) will disable the

sleep function and increase the amount of

generated steam.

Pressing the “MODES” button shall turn off the sleep function

and increase the amount of generated steam (both segments

of the operation indicator on the “MODES” button will be lit).

The “ION” button is used to activate the ionization. The air

humidier has a built-in generator which produces negative

ions that improve air quality and help to improve your health.

After pressing the “ION” button, the appliance will produce

negative ions, the operation indicator on the button will light

up. At any time you can turn this function off, by pressing

again the “ION” button.

The function of ionization does not work in

sleep mode.

The “AUTO” button lets you switch from manual to

automatic mode, by pressing the button, operation indicator

on the button will light up. To disable the automatic mode,

press the “MODES” button.

STARTING THE APPLIANCE

Connect the power cord into an electrical outlet.

The display and operation indicators on the

buttons will turn to illuminate to indicate the

appliance is connected to the supply mains.

Press “ON/OFF” button. You will hear the “tune”, air

humidier will run in automatic mode. Operation indicators

on the button “ON/OFF”, “AUTO” and “MODES” will ash

and the display shows the level of humidity in the room.

Do not operate the appliance if the water tank

is empty.

To turn the appliance off, press the “ON / OFF” button. The

display and operation indicators on the buttons will be off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer AH1500 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info