Bedienungsanleitung Zelmer CK2320 (Seite 50 von 54) (Englisch, Polnisch)

538885

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

54 CK2320-001_v01

Plug in the power cord plug (17) to a grounded electricity

supply outlet. You will hear a short beep and the water level

indicator will illuminate as the appliance will be turned on.

The water indicator light will turn off

automatically after 40 seconds.

Operating the appliance

BOILING AND MAINTAINING WATER

TEMPERATURE (Fig. E)

After plugging in, the appliance will automatically go to

the boiling mode. The (19) (RE-BOIL) LED indicator will

light and the temperature LED indicator (24) will ash for the

value 85°C.

Once water comes to a boil, the appliance will go

to the keep warm mode (accompanied by three sound

alarms) and the temperature LED indicator (24) will light for

temperature 85°C.

Using the button ( ) (23) it is possible to keep the

water at the following temperatures: 98°C, 85°C or 65°C.

It is also possible to turn off the keep-warm function and go

to the cooling mode ( ).

In the keep-warm mode, when water temperature falls

●

below the xed value in grades, the appliance will

automatically switch to the keep-warm mode and once

it reaches the appropriate temperature it will return to the

keep-warm mode.

In the cooling mode, the heater is off and water is cooled

●

automatically to the ambient temperature.

Functions available in the boiling mode: (

●

, DISPENSE,

/ ).

Functions available in the keep-warm mode: (

●

DISPENSE, / , DECHLORINATE/RE-BOIL).

Water temperature will not change instantly

after pressing the button. The heating and

cooling process takes some time, depending

on the amount of water in the appliance.

In order to turn on the re-boiling mode, press the (18)

DECHLORINATE/RE-BOIL button once. The appliance will

start boiling the water.

In the re-boil mode, the

●

RE-BOIL LED indicator (19) will

light and the temperature LED indicator (24) will ash for

the previously selected temperature.

To turn on boiling with dechlorination (in the boil and

re-boil mode), press the DECHLORINATE/RE-BOIL button

(18) twice. The dechlorinate mode will be turned on.

The

●

RE-BOIL LED indicator (19) and the temperature

LED indicator (24) for the previously selected temperature

will both ash.

After the dechlorination process completes, you will hear

●

a sound alarm three times, and the RE-BOIL LED indicator

(19) will go out and the temperature LED indicator (24) for

the previously selected temperature will light steadily.

Boiling takes longer with the dechlorination

function and the appliance generates more

steam (be careful not to be scalded).

If there is no sufcient amount of water in the

appliance, the temperature LED indicators (24)

for 98°C and 65°C will ash together. In such

case, add more water to avoid overheating the

inside of the appliance.

Regularly check if the water level is above

the MIN level on the water level indicator (9).

Otherwise, frequent activation of the anti-

overheat protection may cause discolouration

of the inside of the appliance, smell, blown

fuses, and even a re.

POURING WATER AFTER BOILING (Fig. F)

Press the lock button (21) / , to unlock the

appliance. The lock light (22) will come on.

After turning on, the appliance is automatically locked

●

and the lock light (22) is on.

If within 10 seconds after pressing the lock button

●

(21)

( / ), the DISPENSE button (20) is not pressed or

if no cup or other vessel is placed under the dispensing

spout, the appliance will be locked again and the lock

light (22) will come off.

Pour water by pressing the DISPENSE button (20) or by

placing a vessel under the spout (11) so that it will touch the

dispensing unit with its rim.

After using the appliance (Fig. G)

Unplug the appliance.

Disconnect the power cord from the appliance plug-in

socket (13).

Allow the appliance to cool and remove the lid

●

(3)

in accordance with the description given in the previous

sections.

Pour out all the water through the spout (7).

Make sure that there is no water in the appliance.

●

Replacing the sealing ring (Fig. H)

If the sealing ring (5) breaks or loses its elasticity, steam may

come out from under the lid (3). In such case, replace the

sealing ring (5) with a new one as follows:

Remove the lid as shown in

●

Fig. C.

Unscrew the 4 xing screws.

Take out the inner lid (4).

Replace the sealing ring (5).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer CK2320 Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info