Bedienungsanleitung Zelmer Diana 886 (Seite 61 von 62) (Englisch, Polnisch)

538958

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Description (Fig. A)

The meat mincer consists of:

Drive unit – each drive of the machine is adjusted to the

assembly of each of the mincing set and the shredder

produced by ZELMER. There are ventilation inlets inside

of the rear cavity of the 886 mo-tor compartment.

Mincing set, which consists of:

Mincing chamber

Feed screw with assembled coupling

Cutter knife

Screen with 4mm holes

ring collar

Food tray

Pusher

Equipment, which includes:

Screen with 8 mm holes

Sausage stuffer

Separator

Aperture plate

Disc

Noodles sieve

Vermicelli sieve

Pusher

Mechanical safety device for the motor (Fig. B)

Scroll

Clutch

Screw M5x20

The meat mincer is equipped with mechanical protection,

which secures the motor against any damage – teeth of

the coupling break, when the meat mincer is overloaded

(f. ex. when bones have entered into the mincing chamber).

TYPES OF ZELMER MEAT MINCERS

Below, you can see an assortment of equipment anticipated for the meat mincers, which the user manual refers to.

Typ

Cutter knife

Screen

Sausage stuffer

Pasta and

pastry set

Shredder

4 8

886.5

● ● ● ● ● ○

886.54

● ● ● ● ○ ●

886.8

● ● ● ●

–

○

886.84

● ● ● ●

–

●

● – basic accessories, ○ – additional equipment, which can be bought in shops, household appliances stores,

–

– unavailable accessories

The broken coupling should be replaced with a new one:

unscrew the coupling from the feed screw,

●

remove the broken coupling,

●

put on the new coupling and screw it.

●

Preparing the meat mincer to work

and the actuation of the appliance (Fig. C)

Take out a sufcient length of the supply cord and the

appropriate accessories from the compartment.

Place the drive unit close to the power network socket,

on a rm surface so as not to cover the ventilation holes

within the casing.

Before the rst use of the meat mincer, wash the

●

equipment elements.

Assemble the appropriate equipment and join it with the

●

drive unit.

Put the power cord into the supply network socket.

Turn the meat mincer on with the main switch.

Operating the mincing set (Fig. D)

Put the following elements into the mincing chamber:

Feed screw with the coupling towards the middle.

Put the cutter knife on the feed screw end, with the sharp

edges facing outside.

Put the screen so that the chamber’s protrusion enters

the rut of the screen.

Tighten all the elements of the mincing set – until home.

Put the assembled unit onto the drive unit and turn into

the position, when you hear click of the safety lock.

Put the food tray onto the mincing chamber.

Operating the sausage stuer (Fig. G)

Put the following elements into the mincing chamber:

Feed screw with the coupling towards the middle.

Separator on the feed screw end.

The sausage stuffer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer Diana 886 Seite 61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info