Bedienungsanleitung Zelmer Maestro 13Z012 (Seite 91 von 94) (Englisch, Polnisch)

538893

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Specially designated liquids or tablets. ●

Notice: For liquids and tablets, follow the instructions

shown on the packaging of these products.

Descaling the espresso machine

Warning: Ensure that the espresso machine

is switched off and the connecting cord is

disconnected from the socket.

1. Take out the water tank and rinse it clean.

Depending on the descaling agent used,

follow the steps below:

A. Espresso machine descaling tablets

Pour about 1l of warm water into the

water tank and put in a suitable number

of descaling tablets, as recommended

by the manufacturer. When the

tablets have dissolved (it takes about

5-7 minutes), replace the tank.

B. Descaling liquid

Pour about 1.5l of warm water into the

water tank. Add a suitable amount of the

descaling agent, as recommended by

the manufacturer and replace the tank.

If the lter holder is in the brew head unit, take ●

it out, rinse thoroughly under running water

and put it aside.

Using a screwdriver, unscrew the lter from ●

the bottom of the lter holder unit.

Take out the lter, the washer, the screw, and ●

the seal and put them aside in a safe place.

Important: Be careful not to lose the lter,

the washer, the screw or the seal after

disassembling the brew head unit.

Using a small delicate brush, clean the brewing ●

area of the head removing all coffee particles.

Place a sufciently big container under the ●

brew head unit.

Insert the plug of the connecting cord in the ●

mains socket and switch on the espresso

machine by pressing button .

Warning: Remember that if an inscription

saying „READY does not show on the display,

it means that the espresso machine is in the

course of reaching the operating temperature.

The moment the espresso machine has

reached the right temperature, the line of the

temperature indicator on the display will stop

ashing, symbol and an inscription saying

“READY” will show. This indicates that the

espresso machine has reached the right

temperature and is ready to use.

Turn the regulator knob to the espresso ●

position and allow half of the decaling solution

to ow through the brew head unit.

Important: Do not run the descaling solution

through the steam wand.

Warning: Depending on the size of the

container under the brew head unit, it may be

necessary to empty it during the process.

Turn the knob to position ● 0 to stop the ow

(after about half of the solution has owed

through), next press button to switch the

appliance off.

Leave the espresso machine for about 10-15 ●

minutes allowing the descaling agent to work.

Next press button ● . The espresso machine

will be switched on.

Turn the regulator knob to the espreso ●

position and allow the next portion of the

descaling solution to ow through the brew

head unit.

Take out the water tank from the appliance ●

and rinse it thoroughly under running water.

Check that all traces of the descaling solution

have been removed. Fill up the water tank

with clean water and replace it in the espresso

machine (1) (2) (3) (4) (5).

Press button ● to switch the espresso

machine on, turn the regulator knob to the

espresso position. Run all the clean water

through the head. Repeat the process twice.

Warning: Depending on the size of the

container under the brew head unit, it may be

necessary to empty it during the process.

When the process has nished, remove the ●

container from under the brew head and wipe

the whole brew head unit thoroughly.

Carefully install the rubber seal, the lter, and ●

the washer in the brew head, following their

disassembling procedure in reverse order.

Using a screwdriver, tighten the fastening

screw home.

Fill up the tank with fresh water and replace ●

it in the espresso machine. The appliance is

ready for further use.

GW13-023_v02

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer Maestro 13Z012 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info