Bedienungsanleitung Zelmer MM1200 (Seite 26 von 28) (Englisch, Polnisch)

538799

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

 MM1200-001_v01

Parts and accessories comprising:

Screen with 8 mm holes

Screen with 2.7 mm holes

Sausage stufng tube

Insert

Switch

Lock button

Mechanical safety device for the motor

Scroll

Coupling

Screw M5x20

The mincer is equipped with mechanical protection, which

secures the motor against damage – the teeth of the scroll

coupling will break when the mincer is overloaded (e.g., when

bones have entered inside the mincer body).

Replace the broken coupling with the new one:

unscrew the screw

●

(17) in the scroll (3) with the broken

coupling,

remove the broken coupling

●

(16),

t the new coupling

●

(16) and tighten it with the screw (17).

Working with the mincer unit

Insert the following parts into the mincer body (2):

Insert the scroll (3) with the coupling (16) facing inside.

Fit the knife (4) onto the pin of the scroll (3).

Place the screen (e.g. 5) over the knife so that the

protrusion in the mincer body will t into the groove in the

circumference of the screen.

Tightly t all the elements of the mincer unit.

Fit the assembled mincer unit onto the drive unit (1) and

turn it until you hear a click of the lock.

Place the tray (7) on the mincer body (2).

Preparing the mincer for operation

and starting the mincer

Place the drive unit (1) near the mains socket on a hard,

stable surface. Do not obstruct the ventilation openings in

the housing.

Wash all parts and accessories before the rst use.

●

Assemble all the required parts and attach them to the

●

drive unit.

Carefully pull out the power cord, and then insert the plug

in the mains socket.

Start the mincer by means of the switch button (13).

Working with the sausage stung tube

Insert the following parts into the mincer body (2):

Insert the scroll (3) with the coupling (16) facing inside.

Fit the insert (12) onto the pin of the scroll (3).

Fit the sausage stufng tube (11).

Tightly t all the elements with the threaded ring (6).

Fit the assembled mincer unit onto the drive unit (1) and

turn it until you hear a click of the lock.

Place the tray (7) on the mincer body (2).

Before tting the casing, soak it in warm water for about 10

minutes.

Fit the wet casing onto the sausage stufng tube

●

(11).

Make sure not to clog the ventilation openings in the tube.

 

 



Shredder

Fine grating drum

Coarse grating drum

Slicing drum

Pulping drum

Locking tab

Body

Tray

Pusher

The shredder is equipped with two drums to grate into small

and bigger chips (cheese, carrot, celery, baked beetroots,

etc.). The third grating drum (slicing drum) is used to grate

vegetables (potatoes, onions, cucumbers, etc.). The fourth

grating drum (pulping drum) is used to grate fruit and

vegetables (potatoes, beetroots, etc.) into pulp.

WORKING WITH THE SHREDDER

Release the locking tab (5) and insert one of the grating

drums with the coupling facing the inside of the body.

Snap the locking tab (5).

Attach the shredder body (6) in the same way as the

mincer body.

Cut large products into smaller elements, which you can

●

be easily put into the shredder body.

Do not grate soft fruits containing hard stones.

●

When the work is nished turn off and unplug the

●

appliance.

Remove the food remaining in the shredder body or

●

inside the grating drum with a wooden spoon.

         



Juicer

The juicer is an accessory for some types of mincers. It allows

squeezing juice from fruits such as: raspberries, currants,

strawberries, gooseberry and additionally from grapes and

tomatoes. Berry fruits such as currants can be squeezed with

stalks. Fruits with large stones, such as plums, cherries etc.

can be squeezed in the appliance after removing the stones.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer MM1200 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zelmer MM1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info