Bedienungsanleitung Zelmer MM1200 (Seite 28 von 28) (Englisch, Polnisch)

538799

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

 MM1200-001_v01

THE INSTALLATION OF THE GRINDER ON

THE DEVICE

When the grinder chamber (7) is turned right by about 45°,

t the assembled grinder onto the drive unit by inserting the

protrusions of the grinder chamber (7) into the recesses in the

drive unit, and then turn it left until you hear a “click” of the

lock. It means that the grinder has been attached correctly.

USAGE AND REGULATION OF THE GRINDER

Before the rst use, wash (see “CLEANING”) and dry the

disassembled grinder, and then grind around 50 grams

of product (e.g. food grain) with the grinder set to medium

grinding. The ground product must not be used because it is

contaminated and must be thrown away.

      

      









 





Fill the pan (8) with grain.

Set the body handle (3) to coarse grinding.

Turn on the mincer motor.

The ground product will pour out through the opening.

Depending on the desired grinding level or the type of

grain, adjust the burr regulator (2) with the body handle in

order to obtain the product with the adequate granulation

level. By turning it clockwise you will obtain a ner ground

product, by turning it counter-clockwise – coarser ground

product.

The nest (minimum) grinding level is achieved by setting

the handle to line 1, and the coarsest (maximum) grinding

level by setting it to the STOP line. See the graphic on the

body (3) and burr regulator (2).

By attempting to twist or turn the handle beyond the

STOP line during the operation you can damage the

device.

 





      

      



          



 

      



CLEANING AND MAINTENANCE

The grinder does not require cleaning after each operation

(if one type of product is ground only), because the worm (6)

prevents the grain residues from depositing in the grinder.

Dry the steel burrs (4, 5) using a soft cloth after cleaning to

prevent corrosion. In case of long-term storage, conserve

the burrs by greasing them (you can use edible oil). Do not

immerse the burr in boiling water. The plastic parts (without

the graphic) can be washed in the dishwasher (max. 60°C).

After the work has been nished

Turn off and unplug the appliance.

●

Remove the pusher and take out the tray from the mincer

body.

Press the lock button, turn the mincer unit right and

remove it.

Disassemble the elements of the mincer unit, sausage

stufng tube.

Place the power cord as well as the cleaned and dried parts

in the storage compartment.

Place the screen in the recess.

Put away the power cord.

Store the tray.

Cleaning and maintenance

Clean the drive with a wet cloth, with an addition of

●

dishwashing liquid.

Wash the plastic parts in warm water, with addition of the

●

dishwashing liquid.

Wash the metal parts in hot water, with addition of the

●

dishwashing liquid.

Carefully dry the washed elements.

●

Grease the screens and the knife with edible oil in order

●

to protect them against corrosion.

Assemble the dry parts of the mincer unit or the

●

shredder.

Ecology – Protect the environment

Each user can contribute to protecting the environment. It is

neither difcult nor too expensive. To this end: have the carton

packaging recycled at the recycling centre, put

the plastic bags into the plastic (PE) waste

container. When worn out, bring the appliance

to the appropriate waste collection centre as

some of its components can be hazardous to

the environment.



The manufacturer does not accept any liability for any damages

resulting from unintended use or improper operation of the appliance.

The manufacturer reserves the right to modify the product at any time,

without prior notice, in order to adjust it to legal regulations, standards

and directives or due to constructional, commercial, aesthetic and

other reasons.

Zelmer MM1200 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Zelmer MM1200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info