Bedienungsanleitung Zelmer ZPI6010BE (Seite 45 von 48) (Englisch, Polnisch)

540066

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

PI-003_v02

If you simultaneously press the , buttons for the

given heating zone, the power setting will be reduced to

0 and the heating zone will stop operating.

After removing the utensil from the heating zone, the

heating zone stops operating and the symbol “

” on the

power level indicator will ﬂ ash for one minute. After that

the heating zone switches off (symbol “ ”).

If you place the utensil back on the heating zone

when the symbol “

” is ﬂ ashing, the heating zone will

automatically return to heating at the previous setting.

After operation, switch off the hob with the button.

Power and size of the individual heating zones

Heating zone Size Maximum power

I ∅ 180 mm 1500 W

II ∅ 180 mm 2000 W

III ∅ 180 mm 1500 W

IV ∅ 180 mm 2000 W

Heat indicator

When using the hob for a longer period of time, the given

heating zone remains hot for some time after switching the

appliance off. The symbol “ ” on the power indicator of the

given heating zone warns against accidental touching of the

hot hob.

Detecting improper items

If an item of an improper size (scissors, knife, fork, keys

etc.) or a non-magnetic utensil is placed on the hob, it will

automatically switch to the standby mode

Overheat protection

The hob is equipped with a built-in sensor, which measures

the temperature inside the hob. If the permitted temperature

value is exceeded, the induction hob will automatically

switch off.

Automatic switch off

When the heating zone is switched on without any operation,

the hob will switch off automatically upon the lapse of

a default time depending on the set power level. See table

below:

Power level Time

1-3 8 hours

4-6 4 hours

7-9 2 hours

TIMER function

Select the heating zone with the or button.

Select the desired power level of the selected heating

zone using the

, buttons.

Press the button within 5 seconds (when the

power indicator is ﬂ ashing) and set the desired time

(max. 99 minutes) with the , buttons. If you press

and hold the or button, the time will respectively

increase or decrease by 10 minutes.

Conﬁ rm the settings by pressing the button. Upon

the lapse of the set time a single beep will be heard and the

heating zone will switch off.

To cancel the TIMER function during operation,

●

simultaneously press the , buttons.

A glowing dot symbol next to the power indicator e.g.

“

” indicates that the TIMER function is enabled for the

given heating zone.

If you do not select any heating zone (within 5 seconds)

before pressing the

button, the TIMER function will

not be set to any heating zone. After the lapse of the set

time, a 30-second beep will be heard.

LOCK function

The LOCK function enables to block all the buttons (except

for

and buttons).

Press to block the buttons.

The TIMER indicator will show the symbol “ ”.

To unblock the buttons press and hold the button.

If you switch off the hob with the

button when the

LOCK function is active, to switch it back on you have to

press the button and unblock the hob by pressing

and holding the

button.

Cleaning and maintenance

Remember to keep the hob clean.

Unplug the appliance and before cleaning.

Do not use steam jets to clean the hob.

●

Light dirt

●

wipe the hob with a cloth socked in lukewarm

water wipe until dry with a sponge.

Heavy dirt

●

wipe the hob with a cloth socked in lukewarm

water wipe until dry with a special sponge for cleaning

glass.

Limestone and other residue

●

remove the dirt by

applying a small amount of special substance for

cleaning ceramic glass or white wine vinegar and next

wipe with a dry cloth.

Sweetmeat, melt aluminum, plastic

●

remove by using

a special scraper suitable for cleaning glass and next

wipe with a damp cloth. If necessary use a special

substance for cleaning ceramic glass.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Zelmer ZPI6010BE Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info