Bedienungsanleitung ZyXEL NBG6617 (Seite 67 von 203) (Englisch)

679716

Zoom out

Zoom in

Vorherige Seite

1/203

Nächste Seite

Chapter 10 WAN

NBG6617 User’s Guide

The following table describes the labels in this screen.

Table 20 Network > WAN > Internet Connection: IPoE Encapsulation

LABEL DESCRIPTION

ISP Parameters for Internet Access

Encapsulation You must choose the IPoE option when the WAN port is used as a regular Ethernet.

IPv4 / IPv6 Select IPv4 Only if you want the NBG6617 to run IPv4 only.

Select Dual Stack to allow the NBG6617 to run IPv4 and IPv6 at the same time.

Select IPv6 Only if you want the NBG6617 to run IPv6 only.

IP Address

Obtain an IP

Address

Automatically

(DHCP)

Select this option if your ISP did not assign you a fixed IP address. This is the default

selection.

Static IP Address Select this option if the ISP assigned a fixed IP address.

IP Address Enter your WAN IP address in this field if you selected Static IP Address.

Subnet Mask Enter the Subnet Mask in this field.

Default Gateway Enter a gateway IP address (if your ISP gave you one) in this field.

MTU Size Enter the MTU (Maximum Transmission Unit) size for each packet. If a larger packet

arrives, the NBG6617 divides it into smaller fragments.

DNS Server

First DNS Server

Second DNS Server

Third DNS Server

Select Obtained From ISP if your ISP dynamically assigns DNS server information

(and the NBG6617's WAN IP address). The field to the right displays the (read-only)

DNS server IP address that the ISP assigns.

Select User-Defined if you have the IP address of a DNS server. Enter the DNS

server's IP address in the field to the right.

Select None if you do not want to configure DNS servers. If you do not configure a DNS

server, you must know the IP address of a computer in order to access it.

WAN MAC Address

Once the WAN MAC address is successfully configured, the address will be copied to the configuration file. It

will not change unless you change the setting or upload a different configuration file.

Factory default Select this option to have the WAN interface use the factory assigned default MAC

address. By default, the NBG6617 uses the factory assigned MAC address to identify

itself.

Clone the

computer's MAC

address - IP

Address

Select this option to have the WAN interface use a different MAC address by cloning the

MAC address of another device or computer. Enter the IP address of the device or

computer whose MAC you are cloning.

Set WAN MAC

Address

Select this option to have the WAN interface use a manually specified MAC address.

Enter the MAC address in the fields.

IPv6 Tunneling

Use IPv6 tunneling when the local network uses IPv6 and the ISP has an IPv4 network. When the NBG6617

has an IPv4 WAN address and you set IPv4/IPv6 mode to IPv4 Only, you can enable IPv6 tunneling to

encapsulate IPv6 packets in IPv4 packets to cross the ISP’s IPv4 network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL NBG6617 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL NBG6617

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info