Bedienungsanleitung ZyXEL NBG6617 (Seite 69 von 203) (Englisch)

679716

Zoom out

Zoom in

Vorherige Seite

1/203

Nächste Seite

Chapter 10 WAN

NBG6617 User’s Guide

IPv6 DNS Server

This is available only when you select IPv4 Only in the IPv4/IPv6 field and set IPv6 Tunneling to 6RD,

6in4 or 6to4.

First DNS Server

Second DNS Server

Third DNS Server

Specify the DNS server IPv6 address assigned by the ISP.

IPv6 Address

This section is NOT available when you select IPv4 Only in the IPv4/IPv6 field.

Obtain an IP

Address

Automatically(DHCP

)

Select this option if you want to obtain an IPv6 address from a DHCPv6 server.

•Select DUID-LL (Default) to have the NBG6617 use DUID-LL (DUID Based on

Link-layer Address) for identification when exchanging DHCPv6 messages.

•Select DUID-LLT to have the NBG6617 use DUID-LLT (DUID Based on Link-layer

Address Plus Time) for identification when exchanging DHCPv6 messages.

Static IP Address Select this option if you have a fixed IPv6 address assigned by your ISP.

IPv6 Address Enter the IPv6 address assigned by your ISP.

Prefix length Enter the address prefix length to specify how many most significant bits in an IPv6

address compose the network address.

IPv6 Default

Gateway

Enter the IPv6 address of the next-hop gateway. The gateway helps forward packets to

their destinations.

Link Local Only Select this option to use the link-local address which uniquely identifies a device on the

local network (the LAN).

IPv6 DNS Server

This is available only when you select Dual Stack or IPv6 Only in the IPv4/IPv6 field.

First DNS Server

Second DNS Server

Third DNS Server

Select Obtained From ISP to have the NBG6617 get the IPv6 DNS server addresses

from the ISP automatically.

Select User-Defined and enter the IPv6 DNS server address assigned by the ISP to

have the NBG6617 use the IPv6 DNS server addresses you configure manually.

Select None if you do not want to configure DNS servers. If you do not configure a DNS

server, you must know the IPv6 address of a computer in order to access it.

Multicast Setup

Multicast Setup Select IGMPv1/v2 to enable multicasting. This applies to traffic routed from the WAN

to the LAN.

Select None to disable this feature. This may cause incoming traffic to be dropped or

sent to all connected network devices.

Auto-Subnet Configuration

Enable Auto-IP-

Change Mode

Select this option to have the NBG6617 change its LAN IP address to 10.0.0.1 or

192.168.1.1 accordingly when the NBG6617 gets a dynamic WAN IP address in the

same subnet as the LAN IP address.

Select this option to have the NBG6617 change its LAN IP address to 10.0.0.1 or

192.168.1.1 accordingly when the NBG6617 gets a DNS server IP address in the same

subnet as the LAN IP address.

The NAT, DHCP server and firewall functions on the NBG6617 are still available in this

mode.

Apply Click Apply to save your changes back to the NBG6617.

Cancel Click Cancel to begin configuring this screen afresh.

Table 20 Network > WAN > Internet Connection: IPoE Encapsulation (continued)

LABEL DESCRIPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL NBG6617 Seite 69

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ZyXEL NBG6617

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info