544188

ZyXEL PLA4201 v2 Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
2/2
Copyright © 2015 ZyXEL Communications Corp. All Rights Reserved
EU Importer: ZyXEL Communication A/SGeneratorvej 8D, 2860 Søborg, Denmarkhttp://www.zyxel.dk
US Importer: ZyXEL Communications, Inc1130 North Miller Street Anaheim, CA 92806-2001 http://www.us.zyxel.com
www.zyxel.com
Declaration of Conformity
We herewith declare that this declaration is issued under our sole responsibility：
Product
：
600 Mbps Mini Powerline Ethernet Adapter
Model
：
PLA4201 v2
MANUFACTURED
BY
：
Company
：
ZyXEL Communications Corporation
Address
：
1.No. 2, Gongye E. 9th Road, Hsinchu Science Park, Hsinchu, Taiwan, R.O.C.
2.No. 6, Innovation Road II, Hsinchu Science Park, Hsinchu, Taiwan, R.O.C.
3.
Generatorvej 8D, 2860 Søborg, Denmark
complies with essential requirements of the following EU harmonization legislation and
in conformity with the following presumption of conformity：
Essential requirements Presumption of conformity
Directive 2006/95/EC
(LVD)
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
Directive 2004/108/EC
(EMC)
EN 55022: 2010
EN 61000-3-2:2006+A1:2009+A2: 2009
EN61000-3-3:2008
EN 55024: 2010
EN 50412-2-1:2005
Directive 2011/65/EU
(RoHS)
EN 50581:2012
Directive 2009/125/EC
(ErP)
EN 50564:2011
ZyXEL Communications Corporation
2015-08-12
Date of issue
Richard Hsu
/
Senior
Manager
Quality
Management
Division
安全警告
為了您的安全，請先閱讀以下警告及指示:
• 請勿將此產品接近水、火焰或放置在高
溫的環境。
• 避免設備接觸
• 任何液體 - 切勿讓設備接觸水、雨水、
高濕度、污水腐蝕性的液體或其他水份。
• 灰塵及污物 - 切勿接觸灰塵、污物、沙
土、食物或其他不合適的材料。
•
• 切勿重摔或撞擊設備，並勿使用不正確
的電源變壓器。
若接上不正確的電源變壓器會有爆炸的風
險。
• 請勿隨意更換產品內的電池。
• 如果更換不正確之電池型式，會有爆
炸的風險，請依製造商說明書處理使用過
之電池。
• 請將廢電池丟棄在適當的電器或電子
設備回收處。
• 請勿將設備解體。
• 請勿阻礙設備的散熱孔，空氣對流不足
將會造成設備損害。
• 請插在正確的電壓供給插座(如:北美/台
灣電壓110V AC，歐洲是230V AC)。
• 假若電源變壓器或電源變壓器的纜線損
壞，請從插座拔除，若您還繼續插電使用
，會有觸電死亡的風險。
• 請勿試圖修理電源變壓器或電源變壓器
的纜線，若有毀損，請直接聯絡您購買的
店家，購買一個新的電源變壓器。
• 請勿將此設備安裝於室外，此設備僅適
合放置於室內。
• 請勿隨一般垃圾丟棄。
請參閱產品背貼上的設備額定功率。
• 請參考產品型錄或是彩盒上的作業溫度
。
• 產品沒有斷電裝置或者採用電源線的插
頭視為斷電裝置的一部分，以下警語將適
用:
－ 對永久連接之設備， 在設備外部須安
裝可觸及之斷電裝置；
－ 對插接式之設備， 插座必須接近安裝
之地點而且是易於觸及的。
Troubleshooting
- If a power or Ethernet light does not come on,
please check the cable connections and make
sure the PLA is turned on.
- If the PLA is connected to an Ethernet switch or
router, make sure that the switch or router is
working correctly.
- If the HomePlug light does not turn on, it means
you do not have a Powerline connection. Make
sure that the PLAs are on the same power circuit.
Test by connecting PLAs into nearby outlets.
Make sure that you do not have a power meter
between them.
- To minimize interferance, move PLAs away from
large electrical devices such as refrigerators or
air-conditioners and devices which produce radio
waves such as electrical insect-killers.
- When securing the Powerline network, make
sure not to press the RESET/ENCRYPT or
ENCRYPT buttons on both PLAs for more than 3
seconds. If the process fails, press the said
buttons on both PLAs for 5 to 8 seconds to
disconnect, then try to reconnect again.
- See the User's Guide for more troubleshooting
and for how to use the ZyXEL PLA Series
Configuration utility to manage all PLAs on your
Powerline network(s).
To avoid liquid infiltration, you must plug in the PLA vertically, so that the ventilation holes are not facing up or down.
請將PLA垂直安裝於插座上，確保通風孔不朝上或朝下，避免液體滲入。
(2 seconds)
(2 seconds)
Within...
2
Minutes
INTERNET
Room1
Room2
RESET/
ENCRYPT
RESET/
ENCRYPT
3
4
Safety Warnings
• DO NOT use this product near water, for example, in a wet
basement or near a swimming pool.
• DO NOT expose your device to dampness, dust or corrosive
liquids.
• DO NOT store things on the device.
• DO NOT install, use, or service this device during a
thunderstorm. There is a remote risk of electric shock from
lightning.
• Connect ONLY suitable accessories to the device.
• DO NOT open the device or unit. Opening or removing covers
can expose you to dangerous high voltage points or other risks.
ONLY qualified service personnel should service or disassemble
this device. Please contact your vendor for further information.
• Make sure to connect the cables to the correct ports.
• Place connecting cables carefully so that no one will step on
them or stumble over them.
• Always disconnect all cables from this device before servicing or
disassembling.
• Use ONLY an appropriate power adaptor or cord for your device.
Connect it to the right supply voltage (for example, 110V AC in
North America or 230V AC in Europe).
• DO NOT remove the plug and connect it to a power outlet by
itself; always attach the plug to the power adaptor first before
connecting it to a power outlet.
• DO NOT allow anything to rest on the power adaptor or cord and
do NOT place the product where anyone can walk on the power
adaptor or cord.
• DO NOT use the device if the power adaptor or cord is damaged
as it might cause electrocution.
• If the power adaptor or cord is damaged, remove it from the
device and the power source.
• DO NOT attempt to repair the power adaptor or cord. Contact
your local vendor to order a new one.
• DO NOT use the device outside, and make sure all the
connections are indoors. There is a remote risk of electric shock
from lightning.
• CAUTION: RISK OF EXPLOSION IF BATTERY (on the
motherboard) IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS. Dispose them at the applicable collection point
for the recycling of electrical and electronic equipment. For
detailed information about recycling of this product, please
contact your local city office, your household waste disposal
service or the store where you purchased the product.
• DO NOT obstruct the device ventilation slots, as insufficient
airflow may harm your device.
• The following warning statements apply, where the disconnect
device is not incorporated in the equipment or where the plug on
the power supply cord is intended to serve as the disconnect
device,
– for PERMANENTLY CONNECTED EQUIPMENT, a readily
accessible disconnect device shall be incorporated external to
the equipment;
– for PLUGGABLE EQUIPMENT, the socket-outlet shall be
installed near the equipment and shall be easily accessible.
European Union - Disposal and Recycling Information
The symbol below means that according to local regulations your
product and/or its battery shall be disposed of separately from
domestic waste. If this product is end of life, take it to a recycling
station designated by local authorities. At the time of disposal,
the separate collection of your product and/or its battery will help
save natural resources and ensure that the environment is
sustainable development.
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ZyXEL PLA4201 v2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von ZyXEL PLA4201 v2

ZyXEL PLA4201 v2 Bedienungsanleitung - Englisch - 63 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info