Bedienungsanleitung ZyXEL VMG8825-Bx0B (Seite 127 von 434) (Englisch)

796882

127

Zoom out

Zoom in

Vorherige Seite

1/434

Nächste Seite

Chapter 6 Broadband

VMG/XMG Series User’s Guide

127

Encapsulation Select the method of multiplexing used by your ISP from the drop-down list box. Choices are:

•LLC/SNAP-BRIDGING: In LCC encapsulation, bridged PDUs are encapsulated by identifying

the type of the bridged media in the SNAP header. This is available only when you select IPoE

or PPPoE in the Select DSL Link Type field.

•VC/MUX: In VC multiplexing, each protocol is carried on a single ATM virtual circuit (VC). To

transport multiple protocols, the Zyxel Device needs separate VCs. There is a binding

between a VC and the type of the network protocol carried on the VC. This reduces

payload overhead since there is no need to carry protocol information in each Protocol

Data Unit (PDU) payload.

Service

Category

Select UBR Without PCR for applications that are non-time sensitive, such as email.

Select CBR (Continuous Bit Rate) to specify fixed (always-on) bandwidth for voice or data traffic.

Select Non Realtime VBR (non real-time Variable Bit Rate) for connections that do not require

closely controlled delay and delay variation.

Select Realtime VBR (real-time Variable Bit Rate) for applications with bursty connections that

require closely controlled delay and delay variation.

Peak Cell

Rate [cells/s] Divide the DSL line rate (bps) by 424 (the size of an ATM cell) to find the Peak Cell Rate (PCR). This

is the maximum rate at which the sender can send cells. Type the PCR here.

Sustainable

Cell Rate The Sustain Cell Rate (SCR) sets the average cell rate (long-term) that can be transmitted. Type

the SCR, which must be less than the PCR. Note that system default is 0 cells/sec.

Maximum

Burst Size

[cells]

Maximum Burst Size (MBS) refers to the maximum number of cells that can be sent at the peak

rate. Type the MBS, which is less than 65535.

VLAN (These fields appear when the Type is set to ADSL/VDSL over PTM or ADSL over ATM.)

Click this switch to enable or disable VLAN on this WAN interface. When the switch goes to the

right , the function is enabled. Otherwise, it’s not.

802.1p IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame that

contains bits to define class of service.

Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection. The

greater the number, the higher the priority level.

802.1q Type the VLAN ID number (from 1 to 4094) for traffic through this connection.

MTU

MTU Enter the MTU (Maximum Transfer Unit) size for this traffic.

IP Address (This is available only when you select IPv4 Only or IPv4 IPv6 DualStack in the IPv4/IPv6 Mode field.)

Obtain an IP

Address

Automatically

A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not fixed; the ISP

assigns you a different one each time you connect to the Internet. Select this if you have a

dynamic IP address.

Static IP Address Select this option If the ISP assigned a fixed IP address.

IP Address Enter the static IP address provided by your ISP.

Subnet Mask Enter the subnet mask provided by your ISP.

Gateway IP

Address

Enter the gateway IP address provided by your ISP.

DNS Server (This is available only when you select IPv4 Only or IPv4 IPv6 DualStack in the IPv4/IPv6 Mode field.)

Select Obtain DNS Info Automically if you want the Zyxel Device to use the DNS server addresses

assigned by your ISP.

Select Use Following Static DNS Address if you want the Zyxel Device to use the DNS server

addresses you configure manually.

Primary DNS

Server

Enter the first DNS server address assigned by the ISP.

Table 31 Network Setting > Broadband > Add/Edit New WAN Interface (Routing Mode)

LABEL DESCRIPTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ZyXEL VMG8825-Bx0B Seite 127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info