Bedienungsanleitung AAS Strum Electric GS-1 (Seite 40 von 98) (Englisch)

541315

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

40 Presets and MIDI maps

5.1.2 The Program list

Presets are loaded into the synthesis engine of Strum Elec-

tric from a list of 128 numbered presets called programs. The

name of the current program and its number are displayed in the left of the toolbar at the top of the

application window. The entire list of programs can be viewed by clicking on the  button left of

the program number.

It is important to note that presets in the program list and in the preset library are stored in

different locations. They are in fact different copies of the same presets which may, as explained

below, differ even if they share the same name. The version of a preset available in the program

list should be viewed as temporary or as a ‘working copy” of the preset whereas the version in the

library should be viewed as permanent or as the ‘reference version”.

When you start the application for the ﬁrst time, the program list contains a selection of presets

from the factory preset library. At that point, the presets in the program list are identical to their

version in the library.

One more important to know about programs is the fact that in addition to an instrument preset

(guitar, ampliﬁer and effect section) they also include the settings of the parameters of the lower or

performance section. This allows one to load all the parameters of the interface at once for example

using MIDI program changes.

5.2 Playing and Changing Presets

Presets are always played from the program list. The name of the current program, in other words

the one currently loaded in the synthesis engine, as well as its number are displayed in the left part

of the toolbar. Its number and name are also preceded by a check mark in the program list. The

current program can be changed in different ways:

• scroll up or down in the program list by clicking on the ‘+” and ‘−” buttons located on the

left of the program name or use the ‘+” and ‘−” keys from the computer keyboard,

• Display the content of the program list by clicking on the  button and select a program by

clicking on its name.

• Use the Switch to Program command from the Programs menu and enter a speciﬁc pro-

gram number. This command can also be activated by using the Ctrl-P/Apple-P keyboard

shortcut.

• Send MIDI program changes from your MIDI controller. Strum Electric will load the pro-

gram having the same number as the program change number received by the application.

A Preset can also be loaded from the preset library. It is then stored in the current program

replacing the preset that was already stored in this location. It then becomes immediately available

to the synthesis engine. Different options are available to load a preset from the preset library into

the current program:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AAS Strum Electric GS-1 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info