Bedienungsanleitung AAS Strum Electric GS-1 (Seite 41 von 98) (Englisch)

541315

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

5.3 Editing and Saving Presets 41

• In the browser, double-click on a preset icon.

• Drag and drop presets from the browser onto the Strum Electric interface.

• Select a preset by clicking on its icon and use the Enter key from the computer keyboard.

Once a preset has been selected in the library, it is possible to navigate in the library using the

Arrow keys from the computer keyboard. A preset is selected when its name is highlighted.

• Select a preset and use the Open Preset command from the File menu or the Ctrl-O/Apple-O

keyboard shortcut.

Note that when a preset is loaded from the preset library to the list of programs, the program

name displayed in the toolbar changes but not its number. This indicates that the current program

number used by the synthesis engine is still the same but that the preset corresponding to that

program has changed. The 128 programs can therefore be customized by selecting different pro-

gram numbers (by using the ‘+” and ‘−” buttons from the toolbar or selecting programs from the

program list) and loading presets from the library.

5.3 Editing and Saving Presets

Moving the different controls on the Strum Electric interface modiﬁes the preset loaded in the

current program. As soon as the current program is modiﬁed, the preset icon located on the left of

the program name in the toolbar changes color and a ‘*” sign is appended to its name in the program

list. In this state, the preset loaded in the current program is different from its original version stored

in the preset library even if they share the same name. If you wish to keep a permanent copy of the

modiﬁcations, you must save this new version in the preset library.

• To save the new version in the preset library, use the Save Preset command from the File

menu or the Ctrl-S/Apple-S shortcut. Be careful, however, as using this command will over-

write the original preset. If you are not certain of which preset will be overwritten in the

library, ﬁrst use the Locate Program in Browser command from the Programs menu or the

Ctrl-L/Apple-L shortcut in order to locate it in the browser.

• To create a new preset, use the Save Preset As command from the File menu. A window will

appear asking for a name for the new preset. Once the preset is saved using this command, a

new preset icon will appear in the browser directly under the Library folder.

• To create a new preset, it is also possible to rename the program using the Rename Current

Program from the MIDI menu (or the Ctrl-R/Apple-R keyboard shortcut) and use the Save

Preset or Save Preset As commands.

When editing presets, it is very helpful to go back and forth between the different stages of your

modiﬁcations and adjustments. To move back step by step through every modiﬁcation that was ap-

plied to a preset, use the Undo command from the Edit menu or the Ctrl-Z/Apple-Z shortcut. Once

the Undo command has been used, it is also possible to move up again through the modiﬁcations

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AAS Strum Electric GS-1 Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info