Bedienungsanleitung AAS Strum Electric GS-1 (Seite 42 von 98) (Englisch)

541315

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

42 Presets and MIDI maps

by using the Redo command from the Edit menu or the Ctrl-Y/Apple-Y command. The number

of Undo levels is unlimited and this command is effective on any control of the interface but not

on the different Save commands.

Once a preset has been modiﬁed, it is also possible to move back and forth between the current

state of the preset in the program list and its original version archived in the preset library. To

hear the original preset, simply click on the Compare button at the top of the interface or use the

Compare command from the Edit menu. Once this button has been pressed, the original settings

of the preset are loaded. In this mode, the graphical interface is frozen and it is therefore not

possible to modify the preset. To further modify the preset, click on the Compare button again or

uncheck the Compare command in the Edit menu to revert to the modiﬁed version of the preset and

unfreeze the interface. To reload the original version, use the Locate Preset in Browser command

from the View menu, or the Ctrl-L/Apple-L shortcut and double click on its icon in order to reload

this version into the current program.

Strum Electric will make sure that you do not loose modiﬁcations to a preset. In the case where

a program holds a modiﬁed version of a preset and when trying to load a new preset from the library

into this program, the application will ask you if you want to save the modiﬁed preset in the library.

This behavior might not always be convenient and it is possible to deactivate it by deselecting the

Ask to save preset before opening another option in the Preferences command from the Edit

menu.

5.4 Saving the Program List

When you open Strum Electric, the applications always loads the same program list. This implies

that, by default, the program list will always contain the same presets when you open the application

and that your modiﬁcations to presets will be lost unless they have been saved in the preset library.

• To save the current list of programs and replace the default program list, use the Save All

Programs command from the Programs menu.

This command is helpful if you wish to modify the program list or if you wish to restart the

application in exactly the same state as when you left it.

Note that this operation is not necessary when using Strum Electric as a plug-in in a host

sequencer as the program list is always saved with a project. The default program list will be

loaded only if a new project is started or if a new instance of Strum Electric is opened within a

project.

5.5 Organizing the Preset Library

5.5.1 Creating Folders

Sub-folders can be created by ﬁrst selecting a folder by clicking on it and using the New Folder

command from File menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AAS Strum Electric GS-1 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info