Bedienungsanleitung Ade BA 815 Megan (Seite 6 von 8) (Deutsch, Englisch)

641832

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Thank you for your decision to purchase this high quality body analyser scale. Please

read this instruction manual prior to the start up and keep this user instruction careful

so as to have this information on hand whenever it is needed.

1. How does the body analyser work?

Through this new revolutionary scale you will be able to get information about your

body composition with reference to your weight, body fat %, body water % and muscle

mass %. First of all you have to enter once your personal data like gender, body

height and age under your selected personal memory location. Afterwards a

measurement is as simple as on a normal bathroom scale. You have only to push

your personal memory location, step on the scale and within a few seconds your

weight, body fat, body water and muscle mass will be indicated. The analysis is based

on the measurement of the body’s electrical resistance. A low, safe electrical signal

passes freely through fluids contained in lean tissue, such as muscle and blood, but

meets resistance passing through fat tissue. The body analyser accurately measures

the resistance and with reference to your personal data use it to calculate elements of

body composition.

2. Conditions to use

If possible the measurement should be done undressed but always barefoot.

By nature a body is subject of fluctuations (for example: loss of water after taking

exercise or after a sauna visit, after a meal, etc.). To enable comparable readings it is

important to take the measurements as possible always under the same conditions.

In order to ensure that the results of analysis are accurate and consistent, please keep

the measurement conditions constant always at the same daytime. In the morning,

directly after you’ve woken up, your body will be dehydrated and also the majority of

fluid will be stored in the central trunk area. This means that the resistance is relatively

high because of the poor conductivity in the body. By intensify moving during the day

progresses the fluid becomes more evenly distributed through the limbs and

increasing the accuracy of the readings. To get a realistic result it is important to take

your readings at the same time and under the same conditions every day. The easiest

way to stick the rule, measure always in the morning, 15 minutes after you’ve got up,

either before or after you’ve gone to the bathroom.

In spite of a very low electrical signal, this body analyzer is not suitable for

persons with heart pacemaker or other electronic medical implants! There is no

risk for persons with none electronic implant for instance a titanium plate in the knee.

However, metal conducts the electric current extremely well and therefore the scale

implicates the body fat value “beautified” – means the actual body fat value is higher

as indicated. However, tendencies may be determined as well.

8. Error Messages

Lo“ = Batteries are used up - Please replace the batteries with the intended

type (2 x CR2032).

„Err“ = Overload - The weight exceeds the maximum capacity of 150 kg.

Please immediately remove the critical load to avoid load cell

damage.

„Err ˉ L“ = Low fat indication - Under 5% body fat is not possible to indicate.

„Err ˉ h“ = High fat indication – Over 75% body fat is not possible to indicate.

„C“ Incorrect weighing- / measuring process - For example, the scale

is placed unstable or you do not remain stationary on the weighing

platform.

9. Technical Data

Capacity x graduation: max. 150 kg x 100 g

Display resolution: body fat: 0.1%

Display resolution: body water: 0.1%

Display resolution: muscle mass: 0.1%

Personal memory loc.: 12 positions

Age: 10 – 100 years

Body height: 100 – 250 cm

Dimensions: 300 mm x 313 mm x 21 mm

Batteries: 2 x CR 2032 (included)

Subject to technical modifications

10. Warranty

ADE warrants for a period of 3 years from the date of purchase that it will remedy any

defects due to faulty material or workmanship free of charge by repair or replacement.

When purchasing, please have the warranty coupon signed and stamped by the dealer.

When making a guarantee claim, please return the weighing scale together with the

guarantee card including the reason of complaint to your dealer.

CE-Conformity. This device features radio interference

suppression in compliance with valid EC Regulation 2004/108

Note: The displayed value may be adversely affected under extreme electromagnetic

influences, e.g. when using a radio unit in the immediate vicinity of the device. Once the

interference has been rectified, the product can once again be used for its intended

purpose. The device may have to be switched on again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ade BA 815 Megan Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info