546464
23
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
Installation Instructions
for Bottom-Mounted Devices
• Removeallobjectsfromthecupboardand
anything which is fragile in the adjacent cup-
boards.
• Fortheinstallationthecupboardmustfulfilthe
following conditions:
Thickness of the cupboard floor between
16 mm and 20 mm.
• Thewallmountingofthecupboardmustbestable
and anchored firmly in the wall with at least 2
screws.
• Important! Do not install the device above a
cooker!
• Wheninstallingthedeviceitmustbeensuredthat
there is a power socket within reach.
• Themainssocketmustbewithineasyreach,
so that the plug can be quickly removed in an
emergency.
• Important! Do not connect the device to the
mains power supply until after installation!
• Thedevicecannotbeinstalledundercupboards
under which there is a lighting strip.
• Forinstallationyoumayrequirethefollowing
items: a drill with 6 mm drill bit, gimlet or nail,
screwdriver, measuring tape, adhesive tape,
scissors, safety goggles.
Installation Accessories
4 screws
4 spacers
1 drilling template
Installation
Illustration A (see Page 4)
• Usetheadhesivetapetoadherethetemplateinto
the cabinet with the word FRONT facing forward.
• Adherethetemplatefirmlyunderthecupboard
with adhesive tape. With the help of a gimlet or
nail pierce the crosses at the attachment points
and use it to mark the holes.
• Removethetemplateanddrilltheholesintothe
wall cupboard.
Illustration B (see Page 4)
Lightly turning the spacer gives you a choice of
three different heights.
• Choose the spacer position that best matches
the moulding. Insert the spacer into the holes
provided on the device.
Illustration C (see Page 4)
• Countersinkthescrewsintotheholesinthe
cupboard.
• Usingthe4screwsandthespacers,attachthe
kitchen radio to the bottom of the cupboard.
• Tightenthescrewswithascrewdriveruntilthey
are hand tight.
English
23
CAUTION:
Make sure that the plug is not inserted when
assemb ling the device.
CAUTION:
You should use only the installation accessories
supplied.
WARNING:
If screws are inserted too deeply (screws too
long) this may damage the device or represent a
hazard to the user or others.
NOTE:
For cabinets with overhangs, first insert the
crosses into the attachment points. Then stick the
drilling template, with the printed side up, under
the cabinet.
CAUTION:
The thickness of the cupboard floor must be
between 16 mm and 20 mm.
NOTE:
Sufficient ventilation is only guaranteed with a
spacer.
CAUTION:
You should use a hand screwdriver and not a
battery-driven one.
AEG_KRC_4330.indd 23 10.09.2009 13:24:56 Uhr
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

aeg-krc-4330-dvb-t

Suche zurücksetzen

  • Text Anzeige} auf dem Bildschirm um 180 Grad verdreht Eingereicht am 29-6-2020 20:55

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AEG KRC 4330 DVB-T wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info