Bedienungsanleitung Aiwa BBTC-550 (Seite 6 von 57) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

793942

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

en 10

RECORDING TO CASSETTE

This boombox allows the user to record

cassettes from every input source available

ranging from CD's to Bluetooth playback. In

order to do that follow these simple steps:

1. Press the /MODE button repeatedly to

select the desired function mode.

2. Prepare the medium you want to record

from e.g insert a CD, tune into a radio

station, plug the auxiliary cable...

3. Insert a suitable cassette into the cassette

compartment.

4. Press the and buttons of the top panel

at the same time to start the recording.

CASSETTE PLAYBACK

1. Press the /MODE button to turn on the unit.

2. Press the /MODE button repeatedly until

tAP (tape) function mode appears ﬂashing

on the display.

Once the tape mode has been entered,

the TAPE MODE INDICATOR will appear

on the display.

3. Press the button / of the top panel to

open the cassette door.

4. Insert a cassette and close gently the door

of the compartment.

5. To start the playback, press the button

of the top panel.

Press the button of the top panel to

temporarily stop the playback and press it

again to resume it.

6. Press the / button to stop playback.

CASSETTE FORWARDING/REWINDING

1. Press and hold or buttons of the top

panel to find a specific passage within the

track and release it at the point you want

to listen to.

2. Press the / button to stop fast-forwarding

or rewinding.

BASIC CASSETTE OPERATION

Notes:

• The buttons will automatically release at

the end of the cassette playback.

• While fast-forwarding or rewinding, the

buttons will not release automatically at

the end of the cassette.

Notes:

• This boombox is not suitable for recording

on CHROME (IEC II) or METAL (IEC IV)

cassettes. To record, use NORMAL

cassettes (IEC I) on which the record

tabs (small squares found on the top

corners of the cassette tape) have not

been removed.

• To prevent re-recording on a cassette,

remove the record tabs.

• To re-record a cassette that does not have

recording tabs, just put some adhesive tape

over the squares where the tabs used to be.

• When recording to a cassette from a

auxiliary input or Bluetooth, you can

adjust the volume level from the external

device.

• The best recording volume level is set

automatically.

Adjusting the volume control will not aect

the recording.

• No recording will take place in the ﬁrst 7

seconds and last 7 seconds of the cassette.

CREATING A CD PLAYLIST

The Program feature may be used to program

up to 20 tracks for CD and 99 tracks for

CD-MP3 in a programmable playlist.

1. While in stop mode only (CD is not playing),

press PROG, and the LCD display will show

the wording “P01” and the “Program”

indicator.

You can play your audio CD/ CD-R/ CD-RW/

MP3 in your boombox.

1. Press the /MODE button to turn on

the unit.

2. Lift up manually the CD COMPARTMENT LID.

3. Insert a CD with the printing side facing

up and manually gently close the disc tray.

4. Press the /MODE button repeatedly until

Cd (CD) function mode appears ﬂashing

on the display.

Once the CD mode has been selected, the

CD MODE INDICATOR will appear on the

display.

Then the player will start reading the disc,

and the total number of tracks found will

be displayed.

5. Press SCAN/ to start or resume the

playback. Press SCAN/ again to stop

the playback temporarily.

When the player is in pause mode the

screen will flash to indicate it.

6. Press the button to stop playing.

The display will show again the total number

of tracks.

SELECT ANOTHER TRACK OR FILE

Turn the TUNING KNOB on the right top

panel to the or positions to select

a different track number.

Rotate brieﬂy to once to hear the

beginning of the current track, and turn it

twice or more to hear the previous track.

LISTENING TO YOUR TRACKS REPEATEDLY

Press the REPEAT button on the front

panel repeatedly to activate the REPEAT

FUNCTION in the following order:

1. REPEAT 1 (repeat the current track)

2. REPEAT (repeat all the available tracks)

3. OFF (cancel the repeat function)

ABOUT MP3 DISC COMPATIBILITY

This unit is compatible with:

Sampling Frequency: 32-48 (MP3)

Bit rate: 32-320kbps (MP3)

Do not use special letters such as:

/ :*?< > etc

Even if the total number of files on

the disc is more than 1000, it will only

show up to 999.

BASIC OPERATION CD / MP3

2. Turn the TUNING KNOB to the or

position to allocate the desired track.

3. Press the PROG button to select and store

the track into the memory.

The program sequence will change to

“P02” to choose the next track.

4. Repeat steps 2 and 3 to select up to

20/99 tracks.

5. To play the selected tracks (in the program

mode), press the button.

6. Turn the knob to position to hear the

previous programmed track or turn to

position to hear the next programmed

track.

7. To clear the programmed tracks from the

memory, press the button twice or open

the CD TRAY LID.

Note:

• Because MP3 discs have a large capacity,

disc access times are a little longer.

5. Start the playback of the desired source.

6. Press the button to pause the recording

and press it again to resume it.

7. Press the / button to stop recording.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa BBTC-550 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info