Bedienungsanleitung Aiwa BBTC-550 (Seite 8 von 57) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

793942

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

en 14

BLUETOOTH MODE

BLUETOOTH PAIRING

Prior to using the Bluetooth function, your boombox should be paired first with your Bluetooth

device. (“Pairing” means establish connection between Bluetooth devices such as mobile phones,

tablets, pc, etc).

1. Press the /MODE button to switch to

“bt” Bluetooth mode.

(fig. 1)

2. In Bluetooth mode, a voice prompt will

announce Bluetooth pairing mode and the

“bt” will flash on the display.

The BLUETOOTH MODE INDICATOR will

appear on the top middle of the display.

And the boombox will search automatically

for Bluetooth devices.

3. Turn on the Bluetooth function on your

device and make it visible (see your

device's instructions to add or setup a

Bluetooth device).

4. Search for Bluetooth devices and select

AIWA BBTC-550

Enter the code “0000” if needed.

(fig. 2)

If the devices are paired successfully, the

word “bt” will keep bright on the display,

and a prompt voice will notify that Bluetooth

device is connected.

Having paired successfully, the device will

connect automatically next time.

5. Briefly press to disconnect the paired

Bluetooth device.

(fig. 3)

PLAY FROM A BLUETOOTH DEVICE

1. Press the button to play.

2. To pause or resume play, press the

button again.

3. Turn the tuning knob to or position to

select a dierent track number.

Note:

• Compatibility with all Bluetooth devices

is not guaranteed.

TIME SETTING

SETTING THE CURRENT TIME

This unit has a built in 24 hours format clock

function. Follow the below steps in order to set

the time.

1. While the boombox is in standby mode,

press and hold the PROG/TIME button for

2 seconds.

The time 00:00 will appear flashing on

the display.

2. Turn the TUNING KNOB to the or

positions to set the hour and press the

PROG/TIME button to confirm.

Then the minutes digits on the display will

start flashing.

3. Turn the TUNING KNOB to the or to

the positions to set the minutes and

press the PROG/TIME button to confirm.

Note:

• If no button is pressed for 10 seconds,

the boombox will automatically cancel the

time setting operation.

AUXILIARY INPUT FUNCTION MODE

This unit can be used as an active speaker for

laptop computers, MP3 and other small audio

players following the steps below.

1. Press the /MODE button to turn on the unit.

2. Press the /MODE button repeatedly until

the “AUX” (auxiliary input) function mode

appears ﬂashing on the display.

Once the auxiliary input mode has been

entered, the AUXILIARY INPUT MODE

INDICATOR will appear on the top right

of the display.

3. Connect an auxiliary cable ended with a

3.5mm to the desired external audio device,

and connect the other end to the AUX IN

socket on the side of the unit.

4. Start playback on the external audio device.

Adjust the volume on the external audio

device (do not set the volume to a high

level in order to avoid distortion). You may

also adjust the volume on the boombox. To

control playback function, use the controls

on the external audio device.

AUX-IN MODE

Note:

• The boombox cannot access the contents

in the connected external device.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa BBTC-550 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info