Bedienungsanleitung Aiwa BBTC-550 (Seite 7 von 57) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

793942

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

en 12

FM RADIO

You can store up to 40 of your favorite stations

in the tuner memory for easy recall at any time.

AUTO SCAN

1. Press the /MODE button repeatedly until

“rd” (radio) function mode appears ﬂashing

on the display.

Once the radio mode has been selected, the

FM/MHz and ST FUNCTION INDICATOR

will appear on the right side of the display.

2. Press the SCAN/ button, and the boombox

will scan and brieﬂy stop automatically

whenever it ﬁnds a station with sucient

signal strength.

3. The display will update showing the current

station frequency.

4. Turn the TUNING KNOB to the or

positions to view and listen to the scanned

radio stations.

MANUAL SCAN

1. Press the /MODE button to select “rd”

(radio) mode.

2. Turn the TUNING KNOB to the or

positions to tune to a station. Each turn on

the tuning knob will change the frequency

up or down by 100 kHz.

3. Once you ﬁnd a station you want to save,

press and hold the PROG button on the

front panel for 2 seconds. “S01” will be

shown on the display; turn the knob to

or positions until the desired memory

position number appears on the display.

Press PROG again to conﬁrm and save the

current station.

4. Repeat steps 2 and 3 to store up to 40

stations.

PLAYING STORED STATIONS

Press the PRESET/+10 button repeatedly to

select the desired preset number.

STEREO/MONO BROADCAST

Select stereo or mono broadcast.

1. By default “ST” (stereo) broadcast is the

setting for the tuner mode.

The display will show brieﬂy the word “ST”

when the stereo mode is set and the

ST FUNCTION INDICATOR will appear on

the right top corner.

2. To improve the reception when tuning to

stations with weak signal, change the mode

to monaural sound.

The display will brieﬂy show the word “NO”

when the mono mode is set, and the ST

FUNCTION INDICATOR will disappear.

USB MODE

PLAYING MUSIC VIA USB

This boombox has been developed using

the latest technical advances in the USB

field. However, given the wide range of USB

storage device types that are currently in the

market, we unfortunately cannot guarantee

full compatibility with all of them. For this

reason, in rare cases, there may be problems

playing files from some USB storage devices.

This is not due to device malfunction.

1. Press the button to turn on the unit.

2. Press the /MODE button repeatedly until

the “USb” (USB) function mode appears

ﬂashing on the display.

Once the USB function mode has been

entered, the USB MODE INDICATOR will

appear on the top left of the display.

3. Connect a USB storage device directly

to the USB/MP3 port. The display briefly

shows the number of folders and then

the total number of tracks. Playback will

automatically start after a few seconds.

4. To temporarily stop playback, press the

/SCAN button, and to resume playback,

press it again.

5. Turn the TUNING KNOB to or

positions to select a different track

number.

6. Press the button to stop playing.

LISTENING TO YOUR TRACKS REPEATEDLY

Press the REPEAT button on the front

panel repeatedly to activate the REPEAT

FUNCTION in the following order:

1. REPEAT 1 (repeat the current track)

2. REPEAT (repeat all the available tracks)

3. OFF (cancel the repeat function)

Notes:

• If there’s an incompatible, or no USB

storage device is connected, the display

will show the word “NO”.

• Because some storage devices have a

large capacity, USB access time is a little

longer.

• Switch the device to a dierent operating

mode before you remove the USB storage

device.

• To avoid damaging the boombox or other

devices, do not try to charge any external

device using the USB port.

Note:

• To remove a preset station, store another

station in it's place.

CREATING A USB PLAYLIST

The Program feature may be used to program

up to 99 tracks for the USB mode too, in a

programmable playlist.

1. While in stop mode only (no USB playback),

press PROG, and the LCD display will show

the wording “P01” and the “Program”

indicator.

2. Turn the TUNING KNOB to the or the

positions to allocate the desired track.

3. Press the PROG button to select and store

the track into the memory.

The program sequence will change to

“P02” to choose the next track.

4. Repeat steps 2 and 3 to select up to 99 tracks.

5. To play the selected tracks (in the program

mode), press the button.

6. Turn the knob to the position to hear

the previous programmed track or turn it

to the position to hear the next

programmed track.

7. To clear the programmed tracks from the

memory, press the button twice or change

to another function mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aiwa BBTC-550 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info