Bedienungsanleitung Akai MPC2500 (Seite 23 von 136) (Englisch)

630577

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

Recording the performance

In this section, you will learn how to record the performance

you made with pads to tracks in a sequence.

Note: To record your performance data to a sequence, you need

to load a program to the MPC2500 that you play using the pads.

By default, the MPC2500 automatically loads a preset program

and demo sequence when you switch it on. Here, we assume that

you have already loaded a program to the MPC2500. If you have

not done so, do this now by loading a program from a memory

card, or by recording a sample and assigning it to a pad, etc…

For more information on loading a program, see the “Loading a

file” section on page 107. For more information on recording a

sample, see the “recording a sample” section on page 55.

01. Press the [MAIN] key.

The [MAIN] key displays the MAIN page where

you record your sequences.

02. In the Sq field, select a sequence to which you wish

to record your performance.

You can select any sequence for recording a perfor-

mance; but here, select a sequence that says “un-

used”. “Unused” indicates that the sequence is not

used.

03. In the Tr field, select a track on which you wish to

record your performance.

Your performance will be recorded on the track you

select in the sequence. You can select any track, but

here select “Tr:01”.

04. In the Pgm field, select a program you wish to play.

You can select a program in the RAM by turning

the DATA wheel.

05. Hit pads to check the sounds that are assigned to

the pads.

You can play back the program selected in the Pgm field.

06.

Press the [PLAY START] key while holding the [REC] key.

The recording will start after 4 counts.

07. Play the pads to record your performance.

By default, the sequence is set to 2 bars. After re-

cording for 2 bars, the MPC2500 will start playing

back the recorded performance. You can add to

your original performance by continuing to play

the pads when the track loops. The MPC2500 auto-

matically switches to "over dub" recording and adds

to the performance.

08.

You can stop overdub recording by pressing [STOP] key.

09.

Press the [PLAY] key to play your recorded performance.

10. If you do not like the performance, you can start a

new recording by pressing the [REC]

[PLAY START] keys.

This cancels the currently recorded performance

data and starts a new recording.

11.

To add to the already recorded performance, press the

[PLAY START] key while holding the [OVER DUB] key.

It plays back the currently recorded performance and

you can add the new performance by hitting pads.

Tips: If you select another sequence in the Sq field, you can record

a new performance separately. By playing back those sequences,

you can create one whole song.

Tips: By default, the MPC2500 is set to load a demo sequence

automatically when you turn it on. If you wish to remove the

demo sequence and start from the scratch, see “Deleting all se-

quences” section on page 20.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info