Bedienungsanleitung Akai MPC2500 (Seite 25 von 136) (Englisch)

630577

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

04. In the Erase field, select NOTE ONLY.

Note field will open up.

05. Select the Note field.

If you wish to delete all events, leave it as ALL.. To

delete only events on a specific pad, hit the pad to

delete. You can select several pads. If you hit a dif-

ferent pad by mistake, you can cancel the selection

by hitting the pad again. To restart the pad selec-

tion, turn the DATA wheel to the left. The value in

the Note field will be reset to ALL so that you can

select pad from the beginning.

06. Press [F5] (DO IT) key.

The operation starts and the events of the selected

pad within the selected area will be deleted.

Tips: When you delete events with the Erase field set to ALL

EVENT, the MPC2500 will delete other events in the selected

area as well as pad events. When you delete events with the Erase

field set to EXCEPT Note, the MPC2500 will delete the other

events other than the pad events in the selected area.

Timing correct feature

When recording a pad performance, it is hard to play the

pads to the tempo. By using the timing correct feature,

you can correct the timing of the pad event you recorded

by hitting pads. There are two ways to use this feature:

by correcting the timing in real time during the record-

ing, and by correcting the recorded event after the re-

cording.

• Real time timing correction

You can correct the timing real-time during the recording.

01. When a sequence is stop, press [F1] (T.C.) key in the

MAIN page.

The Timing Correct window will open up.

02. In the Note value field, set the value for timing cor-

rection.

For example, if you set “1/16”, each position of the

performance data will be moved to the nearest 1/16

note.

You can set the Note values as follows.

1/8 = 1/8 note, 1/8(3) = 1/8 note triplets, 1/16 =

1/16 note, 1/16(3) = 1/16 note triplets,

1/32 = 1/32 note, 1/32(3) = 1/32 note triplets,

OFF = NO timing correction.

• Swing feature

You can set the swing value in the Swing% field.

With the swing feature, the even numbered events

set in the Note value field will be off the rhythm

according to the value in the Swing% field. With

this feature you can create the shuffle groove.

03. Press [F4] (CLOSE) key.

It closes the window.

Note: If you press [F5] (FIX) key, the MPC2500 will correct the

timing of the recorded data.

Tips: If you press [F1] (T.C.) key during recording/playback, a

small Timing Correct window will be displayed while you are

holding the key. You can use the Note value field of this window

to change the value for timing correction. It makes it easier to

change the value during the recording.

• Correcting the timing of recorded events

You can correct the timing of recorded events.

01. When a sequence is stop, press [F1] (T.C.) key in the

MAIN page.

Timing Correct window will open up.

02.

In the Note value field, set the value for timing correction.

For example, if you set “1/16”, each position of the per-

formance data will be gridded to the nearest 1/16 note.

You can set the Note values as follows:

1/8 = 1/8 note, 1/8(3) = 1/8 note triplets, 1/16 = 1/16

note, 1/16(3) = 1/16 note triplets, 1/32 = 1/32 note,

1/32(3) = 1/32 note triplets, OFF = NO timing correction.

• Swing feature

You can set the swing value in the Swing% field.

With the swing feature, the even numbered events

set in the Note value field will be off the rhythm

according to the value in the Swing% field. With

this feature you can create the shuffle groove.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info