Bedienungsanleitung Akai MPC2500 (Seite 24 von 136) (Englisch)

630577

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

MPC2500 Operator’s Manual rev 1.0

Chapter 3: Sequence feature

Playing back a sequence

You can play back a recorded sequence by pressing the

[PLAY START] key. The sequence will be played repeatedly

until you press the [STOP] key. If you press the [PLAY] key

again, the MPC2500 will resume the playback from where

the previous play back was stopped.

Repeat play back of a sequence

You can play back several sequences in a series by us-

ing the Next Sequence feature. The Next Sequence fea-

ture allows you to select the next sequence to play, dur-

ing playing back a sequence, so that you can play the

sequences in a series.

01. In the Sq field in the MAIN page, select the sequence

you wish to play first.

02. Press the [PLAY START] key to start the play back of

the sequence.

03. Select the Sq field during play back, and select the

next sequence to play.

Selecting a sequence in the Sq field during the play-

back brings up the Next field, where you can select

the next sequence.

After playing back the currently selected sequence

to the end, the MPC2500 will start playing back the

sequence you select in the Next field. By repeating

this step, you can play back several sequences con-

tinuously.

Tips: With the [NEXT SEQ] key, you can select the next se-

quence with a pad. For more information, see the “Selecting a

sequence with pads” section on page 48.

Tips: In the SONG mode, you can set the order to play sequences.

For more information, see the “SONG mode” section on page 42.

Other useful features for

recording sequences

Undo Sequence feature

When overdubbing sequences, you can cancel the last

recording and reset to the setting before the recording.

01. During overdubbing, press the [STOP] key to stop

the overdub and press the [UNDO] key.

The LED of the [UNDO] key will be off and only the

last added recording will be deleted. To restore the re-

cording, press the [UNDO] key again to light the LED.

Note:

You can use the [UNDO] key only for the last recording.

Erase feature

You can delete a certain pad performance by using the

[ERASE] key. There are two ways to use this feature:

by deleting real-time during overdub, and by selecting

a pad and part to delete in the ERASE window when

overdub is stopped.

• Deleting in real time

01. Press the [PLAY START] key while holding the [OVER

DUB] key to start overdub.

02. Hold the pad you wish to delete while holding the

[ERASE] key.

From the performance data being recorded, only the

section from where you press the [ERASE] key and

pad and you release them will be deleted. By press-

ing the pad at the right timing, you can delete the

performance data at a certain timing in the phrase.

• Deleting in the Erase window

Performance data will be recorded in a track as an event.

In the Erase window, you can select specific events in a

track to delete.

01. Press the [STOP] key to stop a sequence.

02. Press the [ERASE] key.

The Erase window will open up.

The Tr field displays the number and the name of

the selected track. To delete all the events of the

track, select “Tr:00- ALL TRACKS” by turning the

DATA wheel to the left.

03. In the Time field, specify the area to delete events.

You will select the start and end point of the area in

the Time field. For example, to delete only the event

in the first bar from 2-bar sequence, set “001.01.00 -

002.01.00”. In this case, the event at 002.01.00 point

will not be deleted.

If you set the end point “002.01.00” like this, the

area right before the end point will be included in

the area.

002.01.00

001.04.95001.04.94 002.01.01001.04.93

EVENT EVENT EVENT EVENT EVENT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Akai MPC2500 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Akai MPC2500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info