Bedienungsanleitung Al-ko 4705 E (Seite 20 von 278) (Alle Sprachen)

594609

Zoom out

Zoom in

Vorherige Seite

1/278

Nächste Seite

Operation

20 469494_b

For a short lawn, slide the lever in the di-

rection of the front wheel.

For a longer lawn, slide the lever in the

direction of the rear wheel.

2. Allow the lever to engage.

Single wheel quick adjustment

ADVICE

Always adjust both axles to the same

cutting height.

1. To unlock, press the lever to the side and

hold. (1b, 1c)

For a short lawn, slide the lever in the di-

rection of the front wheel.

For a longer lawn, slide the lever in the

direction of the rear wheel.

2. Allow the lever to engage.

Single wheel adjustment

1. Loosen the wheel bolt. (1d)

2. Insert the wheel bolt in the hole for the desired

cutting height.

3. Tighten the wheel bolt.

4. Make sure all wheels at the same hole posi-

tion.

Working height adjustment (option)

Button adjustment

1. Hold both buttons on the upper handle bar

pressed and adjust to the desired position. (5)

2. Release the buttons so that the upper handle

bar engages.

Clamp adjustment

1. Hold the upper handle bar firmly and release

both clamps. (5)

2. Move the upper handle bar to the desired po-

sition and close the clamps.

Attaching the grass catcher

CAUTION!

Risk of injury!

Remove or replace the grass catcher

only while the motor is switched off and

the cutting blade has stopped.

1. Lift up the baffle plate and hang the grass cat-

cher into the holders.

Fill level indicator (option)

The level indicator is pressed upwards by the air

stream during mowing( 2a). If the grass catcher is

full, the level indicator lies flat on the box (2b). The

grass catcher needs to be emptied.

Emptying the grass catcher

1. Lift the baffle plate. (3)

2. Unhook the grass catcher and remove it to the

rear.

3. Entity the grass catcher.

4. Lift up the baffle plate and hang the grass cat-

cher back into the holders.

Establishing the mains connection

1. Insert the mains plug of the unit connecting

line into the switch/plug combination. (6)

2. Secure the unit connecting cables with the ca-

ble tension relief. (7)

ADVICE

The loop of the mains cable must be long

enough so that the cable tension relief

can glide from one side to the other.

Starting the motor

Start the lawn mower only on level ground and

not in high grass. The ground must be free from

foreign objects, such as stones. Do not lift or tilt

the lawn mower to start it.

1. Keep the start switch of the switch/plug com-

bination pressed. (8, 8a, 8b, 8c)

2. Pull the safety bar towards the handle bar and

hold it there. (8, 8a, 8b, 8c)

3. Release the start button.

Switching off the engine

1. Release the safety bar / handle.

2. Wait until the cutting blade stops.

Wheel drive (option)

CAUTION!

Engage the transmission only when the

motor is running.

Switching on the wheel drive

1. Press and hold the transmission control lever

against the upper handle bar - the transmis-

sion control lever does not engage. (9)

Wheel drive is switched on.

Switching off the wheel drive

1. Release the transmission control lever. (9)

Wheel drive is switched on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Al-ko 4705 E Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info