Bedienungsanleitung Al-ko 4705 E (Seite 21 von 278) (Alle Sprachen)

594609

Zoom out

Zoom in

Vorherige Seite

1/278

Nächste Seite

Working information

469494_b 21

WORKING INFORMATION

ADVICE

Observe the local regulations on opera-

ting lawn mowers.

Remove all foreign objects from the lawn prior

to mowing

Keep others away from dangerous areas.

Use the mower only if visibility is good

Guide the machine at walking pace.

Mow only with a sharp cutting blade

Do not mow over obstacles (e.g. branches,

roots of trees).

Mow only across slopes. Do not use the mo-

wer up or down slopes and not on slopes with

more than a slant of 20 degrees.

Added care must be taken on slopes when

changing direction

Tips for mowing

Start mowing as close to the socket as pos-

sible.

Always keep the extension cable on the pre-

viously mowed lawn area.

Constant cutting height 3-5 cm, do not cut

more than half the height of the lawn.

Do not overload the lawn mower! If the motor

speed is greatly reduced due to long, heavy

grass, raise the cutting height and mow se-

veral times.

Mow in the morning or late afternoon to pro-

tect the freshly cut lawn from drying out.

Mow the lawn twice per week during the

strong growing phases. Mow less during pe-

riods of less rain.

Mulching with the mulching kit (option)

With mulching, the cuttings are not collected and

remain on the grass. The mulch protects the

ground from drying out and provides it with nutri-

ents. The best results are achieved by regular cut-

ting of approx. 2 cm. Only young grass with soft

blades will decompose quickly.

Height of grass before mulching: maximum 8

Height of grass after mulching: minimum 4 cm

ADVICE

Adapt your walking speed to the mul-

ching and do not go too quickly.

Utilising the mulch kit

CAUTION!

Risk of injury due to rotating parts!

Remove or replace the mulch kit only

while the motor is switched off and the

cutting blade has stopped.

1. Remove the grass catcher (3)

2. Lift up the baffle plate and insert the mulch kit

into the discharge chute. (4a)

Mulch kit must audibly engage.

ADVICE

If the mulch kit does not engage, the

mulch kit and cutting blade can be dama-

ged.

Removing the mulch kit

1. Lift the baffle plate. (4b-1)

2. Release the locking on the mulch kit. (4b-2)

3. Pull out the mulch kit.

Wheel drive (option)

Adjusting the Bowden cable

If the wheel drive can no longer be switched on or

off while the motor is running, the corresponding

Bowden cable must be readjusted.

CAUTION!

Risk of injury!

Only adjust the Bowden cable when the

motor is switched off.

1. Turn the adjustment part on the Bowden cable

in the direction of the arrow.

2. To check the adjustment, start the motor and

switch on the wheel drive.

3. If the wheel drive still does not function, bring

the lawn mower to a service centre or an aut-

horized specialist firm.

Oiling the drive pinion

Oil the drive pinion on the drive shaft from

time to time with spray oil.

ADVICE

The transmission of the wheel drive is

maintenance-free.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Al-ko 4705 E Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info