Bedienungsanleitung Alecto DVM 70 (Seite 11 von 20) (Englisch)

458285

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

5 ECO MODE

5.1 OPERATION:

If ECO mode is disabled, there is a continuous connection between the camera unit and the

monitor unit, and you have continuous video. The audio is only transmitted if the sound level

you set under ‘Sensitivity’ is exceeded.

If you enable ECO Mode, both the camera unit and the monitor unit go into sleep mode, and

there is NO connection. As soon as the camera unit detects a sound that exceeds the set sen-

sitivity level, the camera unit is switched on and establishes a connection with the monitor unit.

Both video and audio are now transmitted. A few seconds after the sound near the camera unit

stops, the message ‘Eco Mode activated’ appears and the system returns to sleep mode. The

screen now goes black again.

Pleasenotethatoncethesetgoesintosleepmode,theconnectionindicatorlightashesrap-

idlytoindicatethatthereisnoconnection.Inthiscase,thisisnotawarning,butaconrmation

that the system is in the idle state.

5.2 SWITCHING ECO MODE ON/OFF:

1. press the M button

2. use or to scroll to ECO MODE

3. press the M button

4. use or to switch this function on or off

5. press the Mbuttontoconrmyourchoice

6. press to close the menu

as soon as you switch ECO mode on, the lights up

5.3 FORCED VIEWING:

To force the system to allow you to view the room (or, for example, to check the proper function-

ing of the set), you can switch the camera unit on from the monitor unit:

1. press the button

2. the message ‘Eco Mode activated’ appears on screen

3. press the button again to activate the camera unit

4. after around 10 seconds the camera unit switches itself off again

5.4 OUT OF RANGE INDICATION WITH ECO MODE ON:

When the units are in sleep mode, the ‘No link’ message in the display is disabled (the con-

nectionindicatorlightdoes,however,ashrapidly).Iftheconnectionisabruptlycutoffattimes

when there is a connection, the ‘No link’ message appears in the display and, if set, you will

hear the range alarm.

6 SETTINGS

6.1 INTRODUCTION:

The DVM-70 has several settings that you can easily adjust via a simple on-screen menu.

1. press the M button to open the menu

2. use the or buttons to scroll through the menu options

3. press the M button to select the setting (the colour changes from light blue to dark blue)

4. use the or buttons to change the setting (you will hear 2 beeps when you reach the

start or end of the list)

5. press the M button to save the change

6. press to close the menu

if you do not press any button for 10 seconds, the menu is closed and the normal im-

age is displayed again.

At any time, you can go one step back in the menu structure by pressing the button.

6.2 MENU LANGUAGE:

You can set the language in which the various instructions are displayed on screen:

1. press the M button

2. use or to scroll to LANGUAGE (TAAL when the Dutch language is selected)

3. press the M button

4. use or to scroll to the desired language

5. press the Mbuttontoconrmyourchoice

6. press to close the menu

6.3 VIBRATING ALARM:

If you have turned off the sound on the monitor unit, the DVM-70's vibrate function can still alert

you to sound signals from the camera unit:

• if ECO mode is on and the camera unit detects a noise, the image is switched on and the

monitor unit vibrates 3 times in quick succession

• if ECO mode is off, the monitor unit vibrates 3 times in quick succession as soon as the

camera unit detects a loud noise

• if the sound is turned on, the vibrate function is NOT active

1. press the M button

2. use or to scroll to VIBRATION

3. press the M button

4. use or to switch this function on or off

5. press the Mbuttontoconrmyourchoice

6. press to close the menu

when you switch on the vibrating alarm, it is activated briey as a conrmation

also, when you set the receiver volume to level 0 (i.e. no sound) and the vibrate func-

tion is on, the vibrating alarm is activated as a conrmation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DVM 70 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alecto DVM 70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info