Bedienungsanleitung Alecto DVM 70 (Seite 13 von 20) (Englisch)

458285

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

6.4 SENSITIVITY:

You can set the sensitivity with which the camera unit's microphone picks up the sounds and

transmits them to the monitor unit:

1. press the M button

2. use or to scroll to SENSITIVITY

3. press the M button

4. use or to scroll to the desired sensitivity

Level 1: activated by loud sounds ..... Level 5: activated by quiet sounds

you need to determine the ideal level for your situation by trial and error

5. press the Mbuttontoconrmyourchoice

6. press to close the menu

ATTENTION: When your baby is sleeping and the baby-unit does not hear any sound, the

loudspeaker of the parents-unit will be switched off, irrespective the sensitivity setting. As soon

as the baby makes any noise, the loudspeaker will be switched ON again.

6.5 LOW BATTERY / OUT OF RANGE ALARM TONE:

You can set up an alert tone as a warning that the batteries in the camera unit are low or that

the connection between the camera unit and the monitor unit has been lost.

1. press the M button

2. use or to scroll to ALERT TONE

3. press the M button

4. use or to select the low battery alarm or the connection alarm

5. press the M button

6. use or to switch the relevant alarm on or off

7. press the Mbuttontoconrmyourchoice

8. press twice to close the menu

the alarm tones sound even if the volume has been set to 0 (no sound)

if ECO Mode is on, the out of range alarm is not active

the alarm tones sound once, and a warning appears on screen repeatedly; you cannot

disable this visual warning

6.6 BRIGHTNESS:

You can set the brightness of the image as follows:

1. press the M button

2. use or to scroll to BRIGHTNESS

3. press the M button

4. use or to set the desired brightness

5. press the Mbuttontoconrmyourchoice

6. press to close the menu

a low brightness consumes less power; for mobile use, it is therefore advisable to set

a low brightness so the battery lasts as long as possible

6.7 TEMPERATURE:

At the top of the image the temperature is diplayed of the temperature in the room in which the

camera unit is located. This display can be set to degrees Celsius or degrees Fahrenheit. You

can also set an upper and lower limit, so that an alarm tone sounds whenever one of those

limits is exceeded.

1. press the M button

2. use or to scroll to TEMPERATURE

3. press the M button

4. use or to select between ‘Format’, ‘Minimum’, ‘Maximum’ and ‘Alert’

5. press the M button

6. with ‘Format’

use or to set ‘Celsius’ or ‘Fahrenheit’

with ‘Minimum’

use or to set the lower limit

with ‘Maximum’

use or to set the upper limit

with ‘Alarm’

use or to switch the alarm on or off

7. press the Mbuttontoconrmyourchoice

8. press twice to close the menu

when the temperature alarm is switched on,

appears at the top of the screen

the alarm tones sound even if the volume has been set to 0 (no sound)

the alarm tones sound once, and a warning appears on screen repeatedly; please

note: you cannot disable this visual warning

please note that the temperature displayed is only an indication

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alecto DVM 70 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Alecto DVM 70

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info