Bedienungsanleitung Allen-Heath iDR-8 (Seite 7 von 47) (Englisch)

541382

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

iDR-8 User Guide 7

Main Features

• iDR-8 main processing unit 2U, 8 mic/line in, 8

line out audio mix processor with 16x16 channel

matrix. The heart of the iDR system, it features 2

24bit Motorola DSPs.

• Daisy chain iDR-8 units Any number may be

interconnected via the 8 channel digital bus using

CAT5 cable. Many possibilities for flexible sound

system solutions.

• iDR-in 1U, 8 mic/line input expander unit.

Expands the number of inputs to 16. Can be up

to 250 metres away for remote audio. Uses CAT5

digital link. One input expander per iDR system.

• iDR-out 1U, 8 line output expander unit.

Expands the number of outputs to 16. Can be up

to 250 metres away for remote audio. Uses CAT5

digital link. One output expander per iDR system.

• iDR-switch 1U add-on unit providing 24 contact

closure switch inputs and 16 open collector logic

outputs. Up to 3 units may be daisy chained for a

maximum 72 switch and 48 logic outputs. Each

unit can be separated by up to 250 metres.

Connects via the DR-Link serial port.

• PL wall plates and remotes The Allen & Heath

range of optional wall plates and controllers for

remote switch, rotary encoder, infra-red, fader,

LED indicator and logic output control. Connects

via the PL-Anet serial port.

• Desk top or 19” rack mounting Rubber feet and

removable rack ears provided.

• Universal mains power input automatically

detects worldwide voltage from 100V to 240V AC.

• Removable face plate for accessing front panel

setup menu system, RS232 connector and status

indicators. Also provides a protected custom

label facility.

• XLR mic/line inputs Electronically balanced, pin

2 hot, for microphone or line level equipment.

Soft control of gain, pad switch and 48V phantom

power. No internal adjustments needed. Pre ADC

soft limiter to prevent digital distortion.

• XLR line outputs Electronically balanced, pin 2

hot, 0dBu with +18dB headroom.

• Stereo audio monitor with front panel

headphones socket and rear panel TRS jacks.

Can monitor any point in the audio chain using

manual or mouse selection. Can be used with the

audio matrix as two additional channels, for

example providing a 10x10 matrix from an

unexpanded iDR-8.

• Network port for connection to a PC or network

with control using the iDR System Manager or PL

Client software.

• RS232 ports on front and rear for connection to

a PC for code update and to a modem for remote

system interrogation.

• SysNet port for control by third part touch

screens and other remote controllers.

• MIDI port IN, OUT and THRU sockets provided

for remote control using show controllers and

other MIDI equipment.

• 16 Front panel soft keys can be assigned by the

installer as level, mute or patch recall with different

types of press action. Similar applies to the iDR-

switch functions.

• 32 Front panel 3-colour soft LEDs can be

assigned by the installer as signal meters, mute or

patch related indicators.

• Front panel LCD display A 16 character 2 line

LCD can display combinations of clock, patch

name, unit name and user defined text. This can

be linked to the patches.

• iDR System Manager software for system setup.

Once configured the PC can be removed and the

system operated stand alone.

• PL Designer and Client software for creation of

‘virtual’ wall plates and controllers that can be run

from networked PC workstations. Operator

control can be restricted by the installer.

• Powerful fixed architecture with full processing

on all 16 input and output channels. Familiar GUI

makes setup and control an easy task.

• 48/96kHz operating modes The iDR-8 has

processing for the full 16x16 matrix in 48kHz

mode, and 8x8 in 96kHz mode.

• Patchbays and crosspoint matrix The input

source patchbay selects any physical input to any

input channel. The output patchbay selects any

output channel to any physical output. The 16x16

matrix allows independent level control at each

crosspoint.

• Channel stereo linking and grouping Input and

output channels can be linked for true stereo

operation, and grouped for master fader control.

• Configurations can be named, archived and

opened using PC files. These store the system

setup parameters such as communication

options, names, stereo linking, scheduled events

and set of patches.

• Patches Up to 99 patches can be created,

named and stored within the configuration file. A

patch can work with any number of selected

parameters including signal processing, soft key

and LED settings. This provides a unique

flexibility in setting up complex changes with

simple operator control.

• Time and day of week can be displayed on the

unit LCD, and is also used for scheduled event

patch recalls.

• Naming Input channels, output channels and

groups can be named.

• Channel processing The channels have full

processing including faders, mute, polarity

reverse, delay, parametric EQ, crossover filters

noise gates, compressors and limiters.

• Ducking, AMM and paging System functions

include a 16 priority level ducker, automatic mic

mixer and two independent pagers.

• Signal generator provides sine wave, white, pink

and band pass noise signals for system line up

and test.

Allen-Heath iDR-8 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info