Bedienungsanleitung Allen-Heath MixWizard WZ4-16 (Seite 18 von 32) (Englisch)

541379

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Allen & Heath 18 WZ

16:2 and 12:2 User Guide

The MixWizard WZ

16:2 and WZ

12:2 feature a built-in stereo digital effects proces-

sor. The processed signal is routed back to the mix through the ST1 (ST5) stereo return

channel. The two stereo effects mix together into the return channel. The ST1 (ST5)

TRS jack inputs mix with the internal effects processor through the return channel. This

allows you to have the internal and external effects devices returning their processed

signals through one return channel.

AUX SENDS The combined effects signal can be returned to Auxes 1 to 4. These

sends are not affected by the ST1 (ST5) LEV control which returns the signal to the LR

mix. The stereo signal is summed to feed the auxes in mono. This can be changed if

preferred by repositioning internal jumper options so that L feeds auxes 1,3, and R feeds

auxes 2,4. Use the aux sends to add the effects to the monitors if required.

Selecting the effect Use the soft touch effects wheel to scroll through all 20 effects.

Press and release the effects wheel to toggle between the two effects channels on Aux 5

and Aux 6. The effect names and adjustable parameter are printed on the front panel for

reference.

Changing effects parameters Preset parameters can be edited by holding down the

tap button and turning the effects wheel (value P0 to 9). The parameter to be changed

for each effect is listed below the effect name in square brackets.

Tap effects Effects that include a tap parameter will have a flashing decimal point on

the right hand side of the display. Tapping the button will change the tempo shown. Tap

effects are marked with [tap] on the effects list on the front of the mixer.

Turning off the internal effects Once you have scrolled through all 20 effects the

display will show a line to indicate that the effects on this channel are switched off.

Dual Effects Crossfeed The effects channels can be combined to allow one effect to

feed another which gives more control over interaction between effects.

The effects on Aux 5 can be fed into the Aux 6 effects by holding down the tap button

and the effects wheel while turning the wheel to select the amount mixed in. The value

L0 to 9 indicates the amount of effect mixed between channels. The left hand decimal

point comes on to show that this feature is being used. The AUX5 channel pot now

controls this dual effect. The effect is sent through the AUX5 effects processor and then

through the AUX6 effects processor. The feeds are mixed in parallel as shown in the

diagram opposite. The AUX6 channel pot continues to control the amount of the select-

ed channel sent to only the AUX6 effects processor.

ST1 (ST5) LEV Returns the combined stereo effects to the main LR mix. Adjust

from fully off to +6dB maximum boost. Normal 3 0’clock 0dB operating position is

marked on the panel.

FX MUTE Press this switch to mute the stereo return channel. This turns off the

effects feed to the LR mix and auxes 1-4. The channel may also be muted using a

footswitch plugged into the rear of the console. The red indicator lights when the chan-

nel is muted by the MUTE switch and/or the footswitch. Note that the MUTE switch is

latching. This means the effects will remain muted as long as the switch is in its pressed

position regardless of the footswitch.

Resetting the effects presets

To restore the factory default presets hold down

the TAP key and the effects wheel while powering up the console. Make sure you do

this while the amplifiers are turned off. The display will flash some scrolling lines

to confirm the reset.

The STEREO Effects Channel

TAP

AUX

LEV

ST5

MUTE

/ FX

AUX5

AUX6

Parameter

Hold

Press

BeatDelay5

[tap] [regen]

6 SlapDelay

[time]

Ambient

[size]

EchoVerb

[reverb]

EchoSpace

[size]

Doubler

[thickness]

Plate

[decay]

PlateDly

[predly]

PlateEQ

[colour]

Hall1

[size]

Hall2

[size]

Arena17

[size]

SmallSpace18

[size]

ConcertHall

[size]

Delay1

DelayHF

2 DelayLF

[tap] [regen]

PingPong4

[tap] [LFregen]

[tap] [regen]

Off--

Aux send

Flanger19

[intensity]

Chorus20

[depth]

OFF, 1-20

EFFECT

OFF, 1-20

EFFECT

AUX 5

Channel level

AUX 6

Channel level

Crossfeed level

L 0 - 9

EXTERNAL EFFECTS RETURN

L/M

To FX level and

mute circuit

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Allen-Heath MixWizard WZ4-16 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info