Bedienungsanleitung Alpine RUX-C800 (Seite 38 von 67) (Englisch)

471407

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

36-EN

01GB07PXAH800.fm

ALPINE PXA-H800_EN 68-13530Z65-A (B5)

From the Commander

Adjust the MX Plus level. In the Ai-NET mode, the adjustment is

performed for the current source (Initial setting: “OFF” / “Non Effect”).

When an Ai-NET compatible head unit is connected:

Setting item: DVD: OFF/Cinema/Action/Music

AUX/Others: OFF/Compressed/Music/

DVD

CD/Compressed Data/FM/Digital Radio:

OFF/Level1/Level2/Level3

When an Ai-NET compatible head unit is not connected:

Setting item: Non Effect/Compressed 1/Compressed 2/

Compressed 3/Music 1/Music 2/Music 3/

Cinema/Action/Drama/Talk

• For MX Plus, refer to “Setting the MX Plus (Ai-NET Mode)”

(page 44) and “Setting the MX Plus (Standalone Mode)” (page 45).

Adjust the Right and Left speaker volume (Initial setting: “0”).

Setting contents: L (Left) 15 to 0 (Center) to R (Right) 15

• When an Ai-NET compatible head unit is connected, the audio

settings are adjusted at the head unit and you cannot set them on the

unit itself.

Adjust the Front and Rear speaker volume (Initial setting: “0”).

Setting contents: F (Front) 15 to 0 (Center) to R (Rear) 15

• When an Ai-NET compatible head unit is connected, the audio

settings are adjusted at the head unit and you cannot set them on the

unit itself.

When is set to “ON”, the settings for ImprintEQ, Graphic EQ,

Parametric EQ, MX Plus, RoadEQ, and Time Collection are restored to

the initial values (Initial setting: “OFF”).

Setting contents: ON/OFF

Adjust the volume (Initial setting: “-∞ dB”).

Setting contents: -∞ to 0.0 dB

• When an Ai-NET compatible head unit is connected, the audio

settings are adjusted at the head unit and you cannot set them on the

unit itself.

Switching the Sources

The unit accepts up to five analog signal input lines and 2 digital signal

input lines. For the connection, refer to the installation manual.

When an Ai-NET compatible head unit is connected, the source should

be switched at the head unit. This feature is disabled on the Commander.

Press [SOURCE].

Each push switches the source.

AUX1 AUX2 AUX3 Ai-NET(HU) Ai-NET(CHG)

DIGITAL1 DIGITAL2 AUX1

• The number of analog signal inputs varies depending on the setting

in “Setting the AUX Input System (AUX Input Setup)” (page 39).

• Only the sources set as ON in “Setting the AUX Input (AUX IN)”

(page 39) and “Setting the Digital Input (Digital AUX)” (page 40)

are displayed.

• Names selected in “Naming the AUX Input (AUX Name)” (page 41)

are displayed as the source names.

Storing the Preset Values (Preset Store)

You can store up to 6 sets of the adjustment/setting values. All of the

following adjustment/setting values are stored in a single preset

memory.

Adjust the value you want to store and set it.

Press [FUNC.].

Rotate the [Rotary encoder] to select “Preset,” and

then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “Store,” and

then press the [Rotary encoder].

Adjusting the MX Plus Level (MX PLUS

SETUP/LEVEL ADJUSTMENT)

Adjusting Balance (Between Left and

Right) (BALANCE)

Adjusting Fader (Between Front and Rear)

(FADER)

Setting Defeat (DEFEAT)

Adjusting Volume (VOLUME)

Adjustment/Setup items Pages

Setting the Speaker System (System Select) 37

Setting the Speakers(Speaker Setup) 38

Setting the Subwoofer Output (SW Channel) 38

Setting the AUX Input System (AUX Input Setup) 39

Setting the AUX Input (AUX IN) 39

Setting the Digital Input (Digital AUX) 40

Setting the AUX Volume Input Level (AUX IN Gain) 40

Adjusting the AUX Volume Level (AUX Level) 40

Naming the AUX Input (AUX Name) 41

Turning ImprintEQ On/Off 42

Turning RoadEQ On/Off 43

Setting the MX Plus (Ai-NET Mode) 44

Setting the MX Plus (Standalone Mode) 45

Setting the Equalizer Mode (EQ Mode) 46

Setting the Graphic EQ 46

Setting the Parametric EQ 47

Adjusting X-Over and Switching the Phases 49

Adjusting the Time Correction (TCR) 50

Setting the 2-Channel Signal Playback Mode (Mode) 52

Setting EUPHONY (EUPHONY) 52

Using Dolby Pro Logic II (Dolby PLII) 53

Adjusting the Center Width (Center Width) 53

Adjusting the Speaker Volume Level (Output Level) 54

Adjusting the Acoustic Image (BI-PHANTOM) 55

Mixing the Low Range Audio for the Rear (Rear Mix) 55

Mixing the Low Range Audio of the Center with the Front

L/R (Center Bass Split)

Setting the Linear PCM (PCM Mode) 56

Achieving Powerful High Volume Sound (Listening Mode) 56

Adjusting the DVD Level (DVD Level) 57

01GB00PXAH800.book Page 36 Tuesday, February 8, 2011 9:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine RUX-C800 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info