Bedienungsanleitung Alpine RUX-C800 (Seite 39 von 67) (Englisch)

471407

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

37-EN

01GB07PXAH800.fm

ALPINE PXA-H800_EN 68-13530Z65-A (B5)

From the Commander

Select one from “P.1” through “P.6” by rotating the

[Rotary encoder], and press the [Rotary encoder].

The data is stored in the selected preset number.

• The function is operable when Defeat is set to OFF.

• The stored contents are not deleted even when resetting the unit or

disconnecting the battery.

Recalling a Stored Setting (Preset Call)

The preset memory stores various setting/adjustment information. Thus,

it takes some time to call data from the preset memory.

Press and hold [VIEW] for at least 2 seconds.

Select a preset from “P.1” through “P.6” by rotating

the [Rotary encoder], and press the [Rotary

encoder].

The values of the selected preset number are retrieved.

• You can call the Preset even by the following procedure:

1 Press [FUNC.].

2 Rotate the [Rotary encoder] to select “Preset, ” and then

press the [Rotary encoder].

3 Rotate the [Rotary encoder] to select “Call,” and then

press the [Rotary encoder].

4 Select a preset from “P.1” through “P.6” by rotating the

[Rotary encoder], and press the [Rotary encoder].

The values of the selected preset number are retrieved.

• The function is operable when Defeat is set to OFF.

• If the speaker system in the preset and the current speaker system do

not match, the preset cannot be retrieved.

• If the AUX input system in the preset and the current AUX input

system do not match, the items concerning the AUX input system are

unavailable for retrieval.

Setting the Speaker System (System

Select)

First, set the system and the speakers. Unless you set the system, you

cannot set any features. Be sure to set the system first. If the selected

system and the connections of the speakers do not match, the speakers

may be damaged. Make sure to check the connections of the speakers

before selecting the system.

Press [FUNC.].

Rotate the [Rotary encoder] to select “Output

Setup,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “System

Select,” and then press the [Rotary encoder].

The Output System selection screen is displayed.

Rotate the [Rotary encoder] to select a system, and

then press the [Rotary encoder].

F-2way+R+SW: 4.2ch system

(Front2Way+Rear+Subwoofer)

F-3way+SW: 2.2ch system (Front3Way+Subwoofer)

F-3way+R: 4.0ch system (Front3Way+Rear)

F-2way+R+C+SW: 5.1ch system

(Front2Way+Rear+Center+Subwoofer)

• Refer to Table 1 (Output System) in “System Configuration”

(page 60).

Select “OK” by rotating the [Rotary encoder] when a

confirmation message appears, and press the

[Rotary encoder].

The Speaker Setup screen is displayed.

• When “OK” is selected, the audio output is stopped until the ignition

key is turned on/off.

Turn off any unconnected speakers. Rotate the

[Rotary encoder] to select “ON” or “OFF,” etc., and

then press the [Rotary encoder].

Repeat the steps until all the speakers are set.

FRONT HIGH*

: OFF/Tweeter/Full

FRONT LOW: OFF/ON

REAR: OFF/ON

CENTER: OFF/ON

SUBWOOFER(1, 2): OFF/ON

SW CHANNEL: Mono/Stereo*

Only for the initial startup:

Press the [FUNC.] or [Rotary encoder].

The Output System selection screen is displayed. Go to

Step 3.

01GB00PXAH800.book Page 37 Tuesday, February 8, 2011 9:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine RUX-C800 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info