Bedienungsanleitung Alpine RUX-C800 (Seite 58 von 67) (Englisch)

471407

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

56-EN

01GB07PXAH800.fm

ALPINE PXA-H800_EN 68-13530Z65-A (B5)

From the Commander

Mixing the Low Range Audio of the

Center with the Front L/R (Center Bass

Split)

Turning on this function sends the Center channel low frequencies,

equally to the front Left and Right speakers. This enhances the overall

sound when using a small center speaker. This is used when the center

speaker has a small diameter and cannot produce low frequency sounds.

(Initial setting: “OFF”, “315 Hz”)

Press [FUNC.].

Rotate the [Rotary encoder] to select “Multi Ch.

Setup,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “Center Bass

Split,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “ON,” and then

press the [Rotary encoder].

Turning this feature ON mixes the audio signals output from

the front L/R speakers with the center audio signals (low

range).

Adjust the frequency by rotating the [Rotary

encoder].

fc: 200 Hz/225 Hz/250 Hz/280 Hz/315 Hz/350 Hz/400 Hz/

450 Hz/500 Hz

Press and hold [ ] for at least 2 seconds.

• If [ ] is pressed during setting, the unit returns to the previous

item.

• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding

or switching the audio channel of this unit while making this

adjustment. The effect may not be recognized easily depending on the

decoding conditions.

• When the Center speaker is off in “Setting the Speaker System

(System Select)” (page 37)/“Setting the Speakers (Speaker Setup)”

(page 38), this item cannot be set.

• Effective only for Dolby Pro Logic II, EUPHONY and DTS (with

Center signal).

• After the setting, it is recommended to store the setting contents on

the unit. For details, refer to “Storing the Preset Values (Preset

Store)” (page 36).

Setting the Linear PCM (PCM Mode)

The output can be set to 2 or 3 channels when playing discs recorded in

linear PCM. (Initial setting: “2ch”)

Press [FUNC.].

Rotate the [Rotary encoder] to select “Multi Ch.

Setup,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “PCM Mode,”

and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “2ch” or “3ch,”

and then press the [Rotary encoder].

2ch: 2ch Output (L/R)

3ch: 3ch Output (L/R/CENTER)

When the setting is complete, press and hold [ ]

for at least 2 seconds.

• If [ ] is pressed during setting, the unit returns to the previous

item.

• When the Center speaker is off in “Setting the Speaker System

(System Select)” (page 37)/“Setting the Speakers (Speaker Setup)”

(page 38), this item cannot be set.

• After the setting, it is recommended to store the setting contents on

the unit. For details, refer to “Storing the Preset Values (Preset

Store)” (page 36).

Achieving Powerful High Volume Sound

(Listening Mode)

With Dolby Digital, the dynamic range is compressed so that powerful

sound can be achieved at regular volume levels. This compression can

be cancelled to achieve an energetic sound with even greater power, like

the sound in a movie theater. This function works only in the Dolby

Digital mode. (Initial setting: “Standard”)

Press [FUNC.].

Rotate the [Rotary encoder] to select “Multi Ch.

Setup,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “Listening

Mode,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “Standard” or

“Maximum,” and then press the [Rotary encoder].

Standard: To enjoy the dynamic sound at regular volume

Maximum: To enjoy the dynamic sound at maximum volume

01GB00PXAH800.book Page 56 Tuesday, February 8, 2011 9:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine RUX-C800 Seite 58

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info