Bedienungsanleitung Alpine RUX-C800 (Seite 59 von 67) (Englisch)

471407

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

57-EN

01GB07PXAH800.fm

ALPINE PXA-H800_EN 68-13530Z65-A (B5)

From the Commander

When the setting is complete, press and hold [ ]

for at least 2 seconds.

• If [ ] is pressed during setting, the unit returns to the previous

item.

• This feature is effective only for Dolby Digital.

• Use this feature at a volume level at which you can still hear sound

outside of the cabin.

• Depending on the types of source, such as DVD software, this feature

may be ineffective.

• After the setting, it is recommended to store the setting contents on

the unit. For details, refer to “Storing the Preset Values (Preset

Store)” (page 36).

Adjusting the DVD Level (DVD Level)

The volume level for Dolby Digital, Dolby PLII, DTS, EUPHONY and

PCM modes can be set. (Initial setting: “±0dB”)

Press [FUNC.].

Rotate the [Rotary encoder] to select “Multi Ch.

Setup,” and then press the [Rotary encoder].

Rotate the [Rotary encoder] to select “DVD Level,”

and then press the [Rotary encoder].

Select the mode you want to adjust by rotating the

[Rotary encoder], and press the [Rotary encoder].

Adjustment modes: Dolby D/Dolby PLII/DTS/PCM/

EUPHONY

Select the level by rotating the [Rotary encoder].

Adjustment level: -10 to +10 dB (in 1 dB steps)

Press [ ]. Repeat Steps 4 and 5 to set the levels

for each mode.

When the setting is complete, press and hold [ ]

for at least 2 seconds.

• If [ ] is pressed during setting, the unit returns to the previous

item.

• Avoid stopping, pausing, switching the disc, cueing, fast-forwarding

or switching the audio channel of this unit while making this

adjustment. The effect may not be recognized easily depending on the

decoding conditions.

• After the setting, it is recommended to store the setting contents on

the unit. For details, refer to “Storing the Preset Values (Preset

Store)” (page 36).

Lowering Volume Quickly (Mute)

Activating this function will instantly lower the volume level by 20 dB.

Press [MUTE].

The audio level decreases by about 20 dB. “-20 dB Mute”

will be shown in the screen during muting.

To cancel muting, press [MUTE] again.

• Either switch will cancel muting.

• When an Ai-NET compatible head unit is connected, you cannot use

this function.

Turning the Back Light Off (BLACK OUT

function)

When Blackout Mode is turned on, the backlight and illuminated

buttons of the Commander display and the PXA-H800 indicators will be

turned off to reduce power consumption. This additional power

enhances the sound quality.

Press and hold the [Rotary encoder] for at least 2

seconds.

The backlight is turned off. The BLACK OUT indicator will

turn on.

To cancel this, press and hold the [Rotary encoder]

again for at least 2 seconds.

• When another switch is operated while the backlight is off, the

illumination backlight for the display is turned on for 5 seconds and

then turned off again.

Other Useful

Features

FUNC.

VIEW

Rotary encoder

MUTE

BLACK OUT indicator

01GB00PXAH800.book Page 57 Tuesday, February 8, 2011 9:04 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Alpine RUX-C800 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info