Bedienungsanleitung American Audio Q-2422 PRO (Seite 13 von 22) (Englisch)

603204

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

©American Audio® - www.AmericanAudio.com - Q-2422 PRO User Instructions page 13

Q-2422 PRO REAR PANEL - CONTROLS AND FUNCTIONS CONT.

to these jacks when the LINE LEVEL SELECTOR SWITCH (30) is in the “PHONO 2” position, THIS

MAY SERIOUSLY DAMAGE YOUR MIXER! The red colored RCA jack represents the right channel

input and the white represents the left channel input. Input volume will be controlled by the channel

two fader. The channel SOURCE SELECTOR SWITCH (3) must be in the "Phono 2/Aux 2" position,

to monitor any source connected to these jacks.

CHANNEL 2: LINE 2 INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS!

CD players, Tape Decks and other line level instruments may be connected to these jacks. The red

colored RCA jack represents the right channel input and the white represents the left channel input.

Input volume will be controlled by channel two fader. The channel SOURCE SELECTOR SWITCH (3)

must be in the "Line 2" position, to monitor any source connected to these jacks.

. CHANNEL 3: LINE 3 INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS!

CD players, Tape Decks and other line level instruments may be connected to these jacks. The red

colored RCA jack represents the right channel input and the white represents the left channel input.

Input volume will be controlled by channel three fader. The channel SOURCE SELECTOR SWITCH

(3) must be in the "Line 3" position, to monitor any source connected to these jacks.

CHANNEL 3: LINE 4 INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS!

These Jacks are used for line level inputs. Connect CD players or Tape Decks to line level inputs.

Line level musical instruments with stereo outputs such as Rhythm Machines or Samplers should

also be connected to line level inputs. The red colored RCA jack represents the right channel input

and the white represents the left channel input. Input volume will be controlled by the channel three

fader. The channel SOURCE SELECTOR SWITCH (3) must be in the "Line 4" position, to monitor

any source connected to these jacks.

34. REC OUT - This is a low current unbalanced output source designed for various tape and CD

recorders. The Record Out (REC OUT) level is dictated by the

CHANNEL FADER LEVEL (23), it is not

inﬂuenced by the MASTER VOLUME CONTROL (17).

35. ZONE LEVEL OUTPUT - Use this separate output signal to drive a booth monitor or separate

sound system. The output level for these jacks will be controlled by the

ZONE VOLUME KNOB

(13). These RCA jacks send a low current, unbalanced output signal. These jacks should only be

used for shorter cable runs (under 15 feet) to signal processors or looping to another mixer.

36. RCA MASTER OUTPUTS - The Master Output includes a pair

XLR BALANCED JACKS (39)

as well as a pair of RCA Unbalanced Jacks. The RCA jacks send a low current unbalanced output

signal. These jacks should only be used for shorter cable runs to signal processors or looping to

another mixer. For cable runs greater than 15 feet use the

XLR BALANCED JACKS (39).

37. PLAYER CONTROL -

PLAYER A CONTROL - This jack is used to control the “Q-Start” function between the

mixer and a compatible American Audio

® or American DJ® CD Player. Using the mini plug included

with your CD player, connect from the CD player controller out jack to this jack. Player A “Q-Start”

functionallity will be controlled by the left side of the CROSSFADER (22). For more information on

“Q-Start” functionallity refer to the user manual included with your CD player. Be sure to only use

the mono tip mini plug included with your CD player to avoid damage to the mixer and/or the CD

player.

PLAYER B CONTROL - This jack is used to control the “Q-Start” function between the

mixer and a compatible American Audio® or American DJ® CD Player. Using the mini plug included

with your CD player, connect from the CD player controller out jack to this jack. Player B “Q-Start”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

American Audio Q-2422 PRO Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von American Audio Q-2422 PRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info